Difficulty

Moderate

Steps

5

Time Required

                          5 minutes

Sections

2

  • Battery
  • 1 step
  • Display
  • 4 steps

Flags

0

  • BackAsus Z54C-JS31

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the laptop upside down so that the underside is facing up and locate the two switches that are on each side of the battery.
  • Slide the switch on the top right corner to the right.
  • Slide and hold the switch on the top left corner to the left and carefully remove the battery.

Turn the laptop upside down so that the underside is facing up and locate the two switches that are on each side of the battery.

Slide the switch on the top right corner to the right.

Slide and hold the switch on the top left corner to the left and carefully remove the battery.

1024

Step 2

              Display
  • Open up the laptop and locate the two circular stickers at the bottom corners of the display.
  • Use a pair of tweezers to remove the two black stickers covering the screws.
  • Using a Philips #000 screwdriver, remove the two 9mm screws.

Open up the laptop and locate the two circular stickers at the bottom corners of the display.

Use a pair of tweezers to remove the two black stickers covering the screws.

Using a Philips #000 screwdriver, remove the two 9mm screws.

Step 3

  • Use the plastic opening tool to pop off the plastic border around the display.

Use the plastic opening tool to pop off the plastic border around the display.

Step 4

  • Remove the two 9mm screws from the top corners of the display with a Phillips #000 screwdriver.
  • Carefully lift the display out and place the screen face down on the keyboard.

Remove the two 9mm screws from the top corners of the display with a Phillips #000 screwdriver.

Carefully lift the display out and place the screen face down on the keyboard.

Step 5

  • Disconnect the display cable connector attached to the display.

Disconnect the display cable connector attached to the display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Mark DeSimone

Member since: 10/19/2017

801 Reputation

                                      8 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team S3-G1, Bailey Fall 2017                        

                                                  Member of UMass Dartmouth, Team S3-G1, Bailey Fall 2017 



                    UMASSD-BAILEY-F17S3G1                     


                                            2 Members                     


                                            8 Guides authored