Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

3

  • Battery
  • 1 step
  • HDD/RAM Cover Panel
  • 2 steps
  • WiFi Card
  • 2 steps

Flags

0

  • BackAsus Z54C-JS31

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Turn the laptop upside down so that the underside is facing up and locate the two switches that are on each side of the battery.
  • Slide the switch on the top right corner to the right.
  • Slide and hold the switch on the top left corner to the left and carefully remove the battery.

Turn the laptop upside down so that the underside is facing up and locate the two switches that are on each side of the battery.

Slide the switch on the top right corner to the right.

Slide and hold the switch on the top left corner to the left and carefully remove the battery.

1024

Step 2

              HDD/RAM Cover Panel               
  • Use a Phillips #000 screwdriver to remove the two 9mm screws from the HDD/RAM cover panel.

Use a Phillips #000 screwdriver to remove the two 9mm screws from the HDD/RAM cover panel.

Step 3

  • Slide the back panel off by placing a hand on each corner and pulling the panel towards you.

Slide the back panel off by placing a hand on each corner and pulling the panel towards you.

Step 4

              WiFi Card               
  • Disconnect both the black and white coaxial connectors from the WiFi card by pulling up on the gold colored piece.

Disconnect both the black and white coaxial connectors from the WiFi card by pulling up on the gold colored piece.

Step 5

  • Remove the 3mm screw from the top right corner of the WiFi card using a Phillips #0 screwdriver.
  • The WiFi card will pop up. Grasp it and pull it out of its slot.

Remove the 3mm screw from the top right corner of the WiFi card using a Phillips #0 screwdriver.

The WiFi card will pop up. Grasp it and pull it out of its slot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Mark DeSimone                     

Member since: 10/19/2017

801 Reputation

                                      8 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UMass Dartmouth, Team S3-G1, Bailey Fall 2017                        

                                                  Member of UMass Dartmouth, Team S3-G1, Bailey Fall 2017 



                    UMASSD-BAILEY-F17S3G1                     


                                            2 Members                     


                                            8 Guides authored