Asus Zenbook Flip Ux360C Screen Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          45 minutes            

Sections

1

• Screen
• 5 steps

Flags

0

• BackAsus ZenBook Flip UX360C

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The laptop transmits information to LCD screen through an auxiliary cord. A faulty or cracked screen will transmit distorted visuals or no visuals at all.

What you need

Step 1

              Screen               

• Use a spudger to pry out the two rubber grommets from the front of the screen.
• Remove the two 4mm Phillips Head #1 screws behind the grommets.

Use a spudger to pry out the two rubber grommets from the front of the screen.

Remove the two 4mm Phillips Head #1 screws behind the grommets.

1024

Step 2

• Use a large plastic opening tool to work around the outside of the screen and gently separate the two halves.

Use a large plastic opening tool to work around the outside of the screen and gently separate the two halves.

Step 3

• Remove the two 2 mm Phillips #00 camera screws.
• Remove the 2 mm Phillips #0 upper circuit board screw.
• Remove the 2 mm Phillips #0 lower circuit board screw.

Remove the two 2 mm Phillips #00 camera screws.

Remove the 2 mm Phillips #0 upper circuit board screw.

Remove the 2 mm Phillips #0 lower circuit board screw.

Step 4

• Use tweezers to unplug the two ribbon cables from the top half of the screen.
• Detach the upper circuit board cable using the same method.

Use tweezers to unplug the two ribbon cables from the top half of the screen.

Detach the upper circuit board cable using the same method.

Step 5

• On the bottom half of the screen remove the screen connection.
• Disconnect the lower circuit board cable.
• Separate the wiring from the casing, and remove the screen.

On the bottom half of the screen remove the screen connection.

Disconnect the lower circuit board cable.

Separate the wiring from the casing, and remove the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Kristopher Bright                     

Member since: 03/30/2022

397 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       IUPUI, Team 1-4, Harley Spring 2022                        

                                                  Member of IUPUI, Team 1-4, Harley Spring 2022 



                    IUPUI-HARLEY-S22S1G4                     


                                            3 Members                     


                                            3 Guides authored