Difficulty

Moderate

Steps

11

Time Required

                          1 hour

Sections

2

  • Rubber Feet
  • 1 step
  • Speaker
  • 10 steps

Flags

0

  • BackAsus ZenBook Flip UX360C

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The battery must be raised on the bottom edge to access all of the speaker components. The speakers are glued to the chassis, but the opening tool makes removal easy.

What you need

Step 1

              Rubber Feet
  • Turn laptop over.
  • Use the metal spudger to pry rubber feet off in the four corners of laptop.

Turn laptop over.

Use the metal spudger to pry rubber feet off in the four corners of laptop.

1024

Step 2

              Speaker
  • Attach an ESD wristband to your wrist and clip the grounding clamp to a grounded metal object.

Attach an ESD wristband to your wrist and clip the grounding clamp to a grounded metal object.

Step 3

  • Remove all eleven 5 mm, Phillips #1 screws on the back cover.

Remove all eleven 5 mm, Phillips #1 screws on the back cover.

Step 4

  • Use a plastic opening tool to remove the keyboard panel.

Use a plastic opening tool to remove the keyboard panel.

Step 5

  • Use a plastic opening tool to disconnect the ZIF keyboard ribbon cable from the motherboard.

Use a plastic opening tool to disconnect the ZIF keyboard ribbon cable from the motherboard.

Step 6

  • Use nylon-tipped tweezeres to detach the battery connection.

Use nylon-tipped tweezeres to detach the battery connection.

Step 7

  • Remove all ten Phillips #1 battery retaining screws.

Remove all ten Phillips #1 battery retaining screws.

Step 8

  • Using tweezers, carefully remove the connector connecting the speakers to the motherboard.

Using tweezers, carefully remove the connector connecting the speakers to the motherboard.

Step 9

  • Use your fingers or another object to slightly raise the bottom edge of the battery. The battery does not need to be fully removed to replace the speakers.
  • Use a nylon spudger or an opening tool to carefully pry the speaker from the chassis.
  • The speaker is held down with a mild adhesive. Work your way around the border to fully remove the speaker.

Use your fingers or another object to slightly raise the bottom edge of the battery. The battery does not need to be fully removed to replace the speakers.

Use a nylon spudger or an opening tool to carefully pry the speaker from the chassis.

The speaker is held down with a mild adhesive. Work your way around the border to fully remove the speaker.

Step 10

  • Use tweezers to carefully unseat the cable connecting the left and right speakers.

Use tweezers to carefully unseat the cable connecting the left and right speakers.

Step 11

  • Use a nylon spudger or an opening tool to carefully pry the speaker from the chassis.
  • The speaker is held down with a mild adhesive. Work your way around the border to fully remove the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Kristopher Bright

Member since: 03/30/2022

397 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team 1-4, Harley Spring 2022                        

                                                  Member of IUPUI, Team 1-4, Harley Spring 2022 



                    IUPUI-HARLEY-S22S1G4                     


                                            3 Members                     


                                            3 Guides authored