Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
2
- Back Cover
- 3 steps
- RAM
- 3 steps
Flags
0
BackASUS ZenBook UX302LA-BHI5T08
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Flip the laptop over so the model stickers face the ceiling.
Flip the laptop over so the model stickers face the ceiling.
1024
Step 2
- Remove eleven 7mm Phillips #00 screws that secure the back cover.
- Two screws are under the rubber pad.
Remove eleven 7mm Phillips #00 screws that secure the back cover.
Two screws are under the rubber pad.
Step 3
- Using a spudger, carefully remove the back cover.
Using a spudger, carefully remove the back cover.
Step 4
RAM
- To unlock the RAM, simply move the metal brackets using your finger.
- When the RAM is unlocked, it will elevate itself.
To unlock the RAM, simply move the metal brackets using your finger.
When the RAM is unlocked, it will elevate itself.
Step 5
- Remove the RAM from the laptop.
Remove the RAM from the laptop.
Step 6
- To insert the new RAM, line up the hole on the RAM stick and slot.
- Next, push the RAM down gently. It should make a snap sound.
- Do not use too much force as it can break the RAM.
To insert the new RAM, line up the hole on the RAM stick and slot.
Next, push the RAM down gently. It should make a snap sound.
Do not use too much force as it can break the RAM.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jin Feng Lin
Member since: 10/29/2019
330 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S4-G4, Saloman Fall 2019
Member of UMass Dartmouth, Team S4-G4, Saloman Fall 2019
UMASSD-SALOMAN-F19S4G4
3 Members
4 Guides authored