Asus Zenbook Ux303L Ram Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          10 minutes            

Sections

1

• RAM
• 3 steps

Flags

0

• BackAsus Zenbook UX303L

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              RAM               

• Prior to installing RAM, it’s good practice to ground yourself to avoid static discharge from damaging the internal components of the computer.
• Avoid wearing static prone clothing or standing on carpet during the RAM replacement.

Prior to installing RAM, it’s good practice to ground yourself to avoid static discharge from damaging the internal components of the computer.

Avoid wearing static prone clothing or standing on carpet during the RAM replacement.

1024

Step 2

• Unscrew the eight 3 mm long screws on the bottom of the laptop along the parameter using a T5 Torx screwdriver.
• Unscrew the one 8 mm long screw at the bottom of the laptop panel using a T5 Torx screwdriver.
• Once all screws have been removed, carefully lift the bottom panel to reveal the RAM.

Unscrew the eight 3 mm long screws on the bottom of the laptop along the parameter using a T5 Torx screwdriver.

Unscrew the one 8 mm long screw at the bottom of the laptop panel using a T5 Torx screwdriver.

Once all screws have been removed, carefully lift the bottom panel to reveal the RAM.

Step 3

• Carefully pull apart the two clasps circled in red so that the RAM stick pops up.
• Remove the stick of RAM from the SO-DIMM slot by gripping the edges of the RAM.

Carefully pull apart the two clasps circled in red so that the RAM stick pops up.

Remove the stick of RAM from the SO-DIMM slot by gripping the edges of the RAM.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Evan Parker                     

Member since: 04/01/2019

103 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S1-G6, Harley Spring 2019                        

                                                  Member of IUPUI, Team S1-G6, Harley Spring 2019 



                    IUPUI-HARLEY-S19S1G6                     


                                            3 Members                     


                                            7 Guides authored                     

Ochirosi Paul - Apr 1, 2021

Reply

This is incomplete. There are two screws more hidden behind the rubber support points (on the hinges side) of the computer.

And you need some adhesive to fix this rubber squares in place after you fix the lid in place.