Difficulty
Moderate
Steps
8
Time Required
10 - 15 minutes
Sections
2
- Back Panel
- 3 steps
- Screen Assembly
- 5 steps
Flags
0
BackAsus ZenBook UX303U
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove the two round rubber feet at the hinge-edge of the laptop.
Remove the two round rubber feet at the hinge-edge of the laptop.
1024
Step 2
- Remove the eleven 4 mm Phillips #00 screws from the back panel.
Remove the eleven 4 mm Phillips #00 screws from the back panel.
Step 3
- Using a plastic opening tool pry the back panel off of the laptop.
Using a plastic opening tool pry the back panel off of the laptop.
Step 4
Screen Assembly
- Remove cable connecting the screen assembly to the the motherboard.
Remove cable connecting the screen assembly to the the motherboard.
Step 5
- Remove the three 4mm Phillips #00 screws in the hinge to loosen the motherboard fan.
- Lift the hinge up.
- It is not necessary to remove the motherboard fan to replace the screen assembly.
Remove the three 4mm Phillips #00 screws in the hinge to loosen the motherboard fan.
Lift the hinge up.
It is not necessary to remove the motherboard fan to replace the screen assembly.
Step 6
- Remove the three Phillips #00 screws securing the hinge to the IO board.
Remove the three Phillips #00 screws securing the hinge to the IO board.
Step 7
- Remove the Wi-Fi card by pulling it straight out of its connector.
Remove the Wi-Fi card by pulling it straight out of its connector.
Step 8
- Lift the entire lower assembly up and off of the hinges securing it into place.
Lift the entire lower assembly up and off of the hinges securing it into place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 4 other contributors
Dean Anderson
Member since: 02/14/2018
588 Reputation
3 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team S3-G5, Nance Spring 2018
Member of USF Tampa, Team S3-G5, Nance Spring 2018
USFT-NANCE-S18S3G5
3 Members
9 Guides authored
chris.schroeder86 - Feb 3, 2020
Reply
If anyone knows of a good, reliable source to buy a replacement screen assembly let me know, please. I have a 303U with the 1800 screen and I accidentally sat something heavy enough on top of the laptop to crack the screen on the right-third of the screen. I can’t use half of the touch screen and it’s fairly obvious depending on the color/brightness of the content I’m looking at. Would like to be able to replace this and these steps are pretty easy for me to follow so I’m confident I can have a newish looking laptop again if I can find a replacement screen.
Adrien Rousseau - Mar 2, 2021
Hi ! Did you manage to find one? I’m trying to do the same thing :)
Nick Brennan - Apr 7, 2020
Reply
The bottom of the pictured device may feature Phillips #00 screws, but I also have this laptop and the screws around the edge of the bottom panel are Torx T5s on my device.
Kobus - Feb 18, 2021
Reply
It seems that the hinge assembly on one side is broken on my UX303U, on the screen side of the hinge. Do I need to replace the whole screen assembly? The laptop works perfectly otherwise.
Dash OShea - Feb 3, 2022
Reply
Same here, asus ux303u screen side hinge is stuffed. But I think it may actually be the plastic screen cover itself where the hinge attaches, not just the hinge.