Difficulty
Easy
Steps
4
Time Required
10 - 15 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackAsus Zenbook UX31A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The battery is responsible for providing power to all the components of your computer. If your battery has issues, it may lead to your computer no longer powering on.
Before following this guide, make sure that there is nothing wrong with your charging cable and that your charging port is clear of debris as this might lead to the computer appearing as if it has battery issues. Try other charging cables for your computer, and try cleaning out your charging port with an ESD safe brush.
Before you proceed, make sure to power the computer all the way down and disconnect the charging cable.
What you need
Step 1
Battery
- Use a T6 screwdriver to remove the ten 6 mm case screws.
- The two screws adjacent to the device serial number stamps are longer than the others. These two screws run about 11 mm long.
- Remove the back cover from the laptop
- DO NOT BEND OR PUNCTURE THE BATTERY: Puncturing the battery can result in injury since the battery can catch fire or explode when exposed directly to oxygen
Use a T6 screwdriver to remove the ten 6 mm case screws.
The two screws adjacent to the device serial number stamps are longer than the others. These two screws run about 11 mm long.
Remove the back cover from the laptop
DO NOT BEND OR PUNCTURE THE BATTERY: Puncturing the battery can result in injury since the battery can catch fire or explode when exposed directly to oxygen
1024
Step 2
- Use a Phillips #00 screwdriver to remove the three 7 mm screws that secure the battery.
Use a Phillips #00 screwdriver to remove the three 7 mm screws that secure the battery.
Step 3
- Unplug the bundled battery connector from the motherboard by gently pulling the cable up.
- Make sure you pull the connector directly upwards or you could damage the connector
Unplug the bundled battery connector from the motherboard by gently pulling the cable up.
Make sure you pull the connector directly upwards or you could damage the connector
Step 4
- Remove the battery from the laptop by lifting it up and out
Remove the battery from the laptop by lifting it up and out
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Christopoher Orser
Member since: 03/22/2022
285 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team 7-1, Sinclaire Spring 2022
Member of UMass Dartmouth, Team 7-1, Sinclaire Spring 2022
UMASSD-SINCLAIRE-S22S7G1
5 Members
8 Guides authored