Difficulty
Easy
Steps
8
Time Required
30 minutes
Sections
3
- Bottom Panel
- 2 steps
- Battery
- 4 steps
- Hard Drive
- 2 steps
Flags
0
BackAsus Zenbook UX32VD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Panel
- Remove the twelve 3 mm bottom panel screws with a T5 Torx Screwdriver.
Remove the twelve 3 mm bottom panel screws with a T5 Torx Screwdriver.
1024
Step 2
- Use a plastic opening tool to pry along the perimeter of the bottom panel until it can be easily removed.
- Remove the bottom panel from the body of the laptop.
- Set aside the bottom panel.
Use a plastic opening tool to pry along the perimeter of the bottom panel until it can be easily removed.
Remove the bottom panel from the body of the laptop.
Set aside the bottom panel.
Step 3
Battery
- Remove the eight 3 mm Phillips #0 screws on the bottom panel.
Remove the eight 3 mm Phillips #0 screws on the bottom panel.
Step 4
- Pry up each side of the flat connectors by hand or with a plastic opening tool.
- Lift the connector straight up from its socket.
Pry up each side of the flat connectors by hand or with a plastic opening tool.
Lift the connector straight up from its socket.
Step 5
- Unplug the two bundled cable connectors on each side of the battery.
- Pull the cable away from the connector in the same direction as the individual wires are running.
- Pull evenly on the full width of the cable so that no individual wires are overly strained.
Unplug the two bundled cable connectors on each side of the battery.
Pull the cable away from the connector in the same direction as the individual wires are running.
Pull evenly on the full width of the cable so that no individual wires are overly strained.
Step 6
- Remove the battery completely.
Remove the battery completely.
Step 7
Hard Drive
- Remove the four 3mm hard drive screws with a Phillips #0 Screwdriver.
Remove the four 3mm hard drive screws with a Phillips #0 Screwdriver.
Step 8
- Lift the hard drive slightly and gently pull the hard drive from the socket.
- Do not lift the hard drive too high. Doing so could damage the hard drive or other internal components of the laptop.
- Remove the hard drive completely.
Lift the hard drive slightly and gently pull the hard drive from the socket.
Do not lift the hard drive too high. Doing so could damage the hard drive or other internal components of the laptop.
Remove the hard drive completely.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
Author
with 3 other contributors
Michael Remmel
Member since: 09/17/2015
700 Reputation
3 Guides authored
Badges:
12
+9 more badges
Team
CSU Fullerton, Team 2-2, Bruce Fall 2015
Member of CSU Fullerton, Team 2-2, Bruce Fall 2015
CSUF-BRUCE-F15S2G2
4 Members
6 Guides authored
Le Zap - Nov 4, 2017
Reply
Installed a new WD Blue 3D NAND 500GB PC SSD - SATA III 6 Gb/s 2.5"/7mm Solid State Drive into my UX32VD using this guide. It works like charm! Thanks for the guide
Android Phone - Aug 26, 2018
Reply
Excellent! Precise and concise to the point!Thank you!
sina - Jun 21, 2019
Reply
Exzellent Guide, Thank you so much!
Karim Othman - Nov 28, 2019
Reply
can someone confirm to me that samsung evo 860 will work or not for this asus please