Difficulty

Moderate

Steps

5

Time Required

                          1 hour

Sections

1

  • HD Web Camera
  • 5 steps

Flags

0

  • BackAsus Zenbook UX32VD

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Note: Be sure the camera is broken and not just a software issue before you replace it.

What you need

Step 1

              HD Web Camera
  • Heat the adhesive behind the screen frame with a hair dryer or a heat gun.
  • Use low heat with the heat gun. Over heating could damage delicate electronic components.

Heat the adhesive behind the screen frame with a hair dryer or a heat gun.

Use low heat with the heat gun. Over heating could damage delicate electronic components.

1024

Step 2

  • Insert a spudger between the display screen frame and the back screen panel.
  • Pry the display screen frame away from the back screen panel.
  • Continue to heat and remove the display screen frame along the whole perimeter.

Insert a spudger between the display screen frame and the back screen panel.

Pry the display screen frame away from the back screen panel.

Continue to heat and remove the display screen frame along the whole perimeter.

Step 3

  • Remove display screen frame completely before adhesive cools and hardens.

Remove display screen frame completely before adhesive cools and hardens.

Step 4

  • Unplug the bundled cable connector.
  • Pull the cable away from the connector in the same direction as the individual wires are running.
  • Pull evenly on the full width of the cable so that no individual wires are overly strained.

Unplug the bundled cable connector.

Pull the cable away from the connector in the same direction as the individual wires are running.

Pull evenly on the full width of the cable so that no individual wires are overly strained.

Step 5

  • Pry the camera out from the two pins on the left and right of the camera with the tip of a spudger.
  • Remove the camera completely.

Pry the camera out from the two pins on the left and right of the camera with the tip of a spudger.

Remove the camera completely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Michael Remmel

Member since: 09/17/2015

700 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       CSU Fullerton, Team 2-2, Bruce Fall 2015                        

                                                  Member of CSU Fullerton, Team 2-2, Bruce Fall 2015 



                    CSUF-BRUCE-F15S2G2                     


                                            4 Members                     


                                            6 Guides authored

tukangsedot - Apr 26, 2016

Reply

what type/model/code for its replacement camera ? so i cant find it in part store…

Mehran Gerami - Jul 4, 2022

Reply

Thank you for the demo. It appears to be easy to replace the camera per your instructions. Kind regards. Mehran Gerami