Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
2
- Bottom Panel
- 2 steps
- RAM
- 1 step
Flags
0
BackAsus Zenbook UX32VD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Panel
- Remove the twelve 3 mm bottom panel screws with a T5 Torx Screwdriver.
Remove the twelve 3 mm bottom panel screws with a T5 Torx Screwdriver.
1024
Step 2
- Use a plastic opening tool to pry along the perimeter of the bottom panel until it can be easily removed.
- Remove the bottom panel from the body of the laptop.
- Set aside the bottom panel.
Use a plastic opening tool to pry along the perimeter of the bottom panel until it can be easily removed.
Remove the bottom panel from the body of the laptop.
Set aside the bottom panel.
Step 3
RAM
- Push away the RAM retaining arms from the RAM chip.
- The RAM chip will spring up once the retaining arms are pushed away from the chip.
- Remove the RAM chip completely.
Push away the RAM retaining arms from the RAM chip.
The RAM chip will spring up once the retaining arms are pushed away from the chip.
Remove the RAM chip completely.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Paola
Member since: 09/17/2015
234 Reputation
1 Guide authored
Badges:
12
+9 more badges
Team
CSU Fullerton, Team 2-2, Bruce Fall 2015
Member of CSU Fullerton, Team 2-2, Bruce Fall 2015
CSUF-BRUCE-F15S2G2
4 Members
6 Guides authored
Le Zap - Nov 4, 2017
Reply
Replaced the 4 GB RAM module in my UX32VD with an 8 GB Timetec Hynix IC DDR3 1600MHz PC3-12800 Non ECC Unbuffered 1.35V CL11 2Rx8 Dual Rank 204 Pin SODIMM Laptop Notebook Computer Memory Ram Module using this guide. It worked like a charm. Thank you for posting the guide!