Difficulty
Moderate
Steps
6
Time Required
15 - 20 minutes
Sections
1
- Battery
- 6 steps
Flags
0
BackAsus ZenBook UX430
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
To minimize the risk of damaging your device, allow the battery of your device to discharge fully before starting this procedure. A lithium-ion battery with a charge can create a dangerous fire if punctured. If your battery is swollen, you should take extra steps
What you need
Step 1
Battery
- Hold the power button to turn off the laptop.
Hold the power button to turn off the laptop.
1024
Step 2
- Remove the seven T5 Torx screws securing the bottom case to the chassis.
- Remove the two T5 Torx screws that are threaded differently.
- The top left and top right screws use different threads than the rest of the screws and should be kept separately to avoid damage.
Remove the seven T5 Torx screws securing the bottom case to the chassis.
Remove the two T5 Torx screws that are threaded differently.
The top left and top right screws use different threads than the rest of the screws and should be kept separately to avoid damage.
Step 3
- Remove the two rubber feet from the bottom casing.
- Remove the two screws holding the bottom casing to the chassis using a Phillips #1 screwdriver.
Remove the two rubber feet from the bottom casing.
Remove the two screws holding the bottom casing to the chassis using a Phillips #1 screwdriver.
Step 4
- Use an iFixit opening tool to gently pry open the bottom case away from the top case.
- The bottom case is secured to the upper case with four plastic clips near the edges of the laptop.
- Gently pull the lower case away from the upper case of the laptop by lifting the top first.
Use an iFixit opening tool to gently pry open the bottom case away from the top case.
The bottom case is secured to the upper case with four plastic clips near the edges of the laptop.
Gently pull the lower case away from the upper case of the laptop by lifting the top first.
Step 5
- Use a Phillips 1 screwdriver to remove the five screws holding the battery to the motherboard.
Use a Phillips 1 screwdriver to remove the five screws holding the battery to the motherboard.
Step 6
- Carefully lift the battery from the bottom casing.
- While removing the battery, ensure that the battery connector is raised enough so that it doesn’t get in contact with the motherboard.
- Lithium-ion batteries can be dangerous if handled poorly. Be cautious to not let any sharp objects near the battery to avoid puncturing it. Use the correct procedures to recycle the battery in your region.
Carefully lift the battery from the bottom casing.
While removing the battery, ensure that the battery connector is raised enough so that it doesn’t get in contact with the motherboard.
Lithium-ion batteries can be dangerous if handled poorly. Be cautious to not let any sharp objects near the battery to avoid puncturing it. Use the correct procedures to recycle the battery in your region.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Tanveer Saini
Member since: 09/27/2022
133 Reputation
1 Guide authored
Badges:
3
Team
York University, Team B-11, Allen Fall 2022
Member of York University, Team B-11, Allen Fall 2022
YORK-ALLEN-F22SBG11
4 Members
1 Guide authored
