Difficulty
Moderate
Steps
13
Time Required
2 hours
Sections
1
- Display
- 13 steps
Flags
4
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackASUS ZenFone 2 Laser
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
SIM and battery removal
- Remove the back cover.
- Disconnect the battery.
- Remove the SIM card and the micro SD card.
Remove the back cover.
Disconnect the battery.
Remove the SIM card and the micro SD card.
1024
Step 2
Remove the screws
- Unscrew the 15 screws
Unscrew the 15 screws
Step 3
Internal back cover
- Remove the plastic back with opening picks making sure not to break the clips that hold it in place
Remove the plastic back with opening picks making sure not to break the clips that hold it in place
Step 4
Flat cable display
- Disconnect the two flat cables by lifting the white bracket
- Unplug the camera
Disconnect the two flat cables by lifting the white bracket
Unplug the camera
Step 5
Rear speaker
- With the help from a spudger, remove the rear speaker
With the help from a spudger, remove the rear speaker
Step 6
Motherboard
- Starting from the bottom lift the motherboard
Starting from the bottom lift the motherboard
Step 7
Frame Assembly
- Mother board.
Mother board.
Step 8
Touchscreen driver
- Disconnect the touchscreen driver to remove the screen
Disconnect the touchscreen driver to remove the screen
Step 9
Screen removal
- With the help of a hair dryer, heat gun or an iOpener remove the screen from the phone’s frame
With the help of a hair dryer, heat gun or an iOpener remove the screen from the phone’s frame
Step 10
Preparation of the new screen
- Remove glue residues on the perimeter of the frame
- Re-adhere the display
Remove glue residues on the perimeter of the frame
Re-adhere the display
Step 11
Screen adhesive
- apply the double-sided adhesive to the frame
apply the double-sided adhesive to the frame
Step 12
New screen
- Replace or reposition the dust gasket of the front camera before installing the new screen
- Insert the new screen into position by passing the flat into the specific grooves
Replace or reposition the dust gasket of the front camera before installing the new screen
Insert the new screen into position by passing the flat into the specific grooves
Step 13
Reassembly
- Refit the logic board
Refit the logic board
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
mohamedhamam aboushaaban
Troy weglinski
irlanda
Ben Johnson
and 3 others…
+3
Author
with 2 other contributors
gwsLabs
Member since: 12/23/2016
457 Reputation
2 Guides authored
Badges:
5
+2 more badges
CJ Ogasawara - Jun 19, 2018
Reply
Just had my cracked LCD replaced. Everything was working fine before the replacement but after that, a third of a centimeter and all the subkeys (Back, Home, Recent keys) we rented working. The tech tried to checkout the fitting but it still didn’t work. Had to install an assistive key app to be able to use the phone. He told me to go back on Thursday to replace the LCD with a different one cuz this last unit they had might be defective. Could it be a screen seating problem or an issue related to glue remnants or excess adhesive?
