Difficulty
Easy
Steps
7
Time Required
5 - 10 minutes
Sections
1
- Battery
- 7 steps
Flags
0
BackAsus ZenFone 3 Zoom
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Using a pair of tweezers, pull put the SIM card tray and set it to the side.
Using a pair of tweezers, pull put the SIM card tray and set it to the side.
1024
Step 2
- Remove the two 2 mm screws using a Torx T2 screwdriver.
Remove the two 2 mm screws using a Torx T2 screwdriver.
Step 3
- Insert a prying tool between the screen and the metal backing of the phone at the bottom to remove backing from phone.
- There will be a thin film connecting the two pieces. You do not need to remove this. Just fold the two pieces apart with the inside facing up.
Insert a prying tool between the screen and the metal backing of the phone at the bottom to remove backing from phone.
There will be a thin film connecting the two pieces. You do not need to remove this. Just fold the two pieces apart with the inside facing up.
Step 4
- Remove the two 3 mm screws, using the Phillips #00 screwdriver, on the silver band at the top of the battery and remove the band.
Remove the two 3 mm screws, using the Phillips #00 screwdriver, on the silver band at the top of the battery and remove the band.
Step 5
- Peel back the silver tape.
Peel back the silver tape.
Step 6
- Disconnect the battery connections.
Disconnect the battery connections.
Step 7
- Pry and remove the battery.
- The underside of the battery is adhesive so make sure to pry the battery off gently.
Pry and remove the battery.
The underside of the battery is adhesive so make sure to pry the battery off gently.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 2 other contributors
Joshua Fontenelle
Member since: 09/10/2018
223 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
University of Alabama, Team S2-G7, Bedsole Fall 2018
Member of University of Alabama, Team S2-G7, Bedsole Fall 2018
UA-BEDSOLE-F18S2G7
4 Members
10 Guides authored