Asus Zenfone 3 Zoom Speaker Charger Port Headphone Jack Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          15 - 20 minutes            

Sections

2

• Battery
• 7 steps
• Speaker/Charger Port/Headphone Jack
• 4 steps

Flags

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

• BackAsus ZenFone 3 Zoom

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Using a pair of tweezers, pull put the SIM card tray and set it to the side.

Using a pair of tweezers, pull put the SIM card tray and set it to the side.

1024

Step 2

• Remove the two 2 mm screws using a Torx T2 screwdriver.

Remove the two 2 mm screws using a Torx T2 screwdriver.

Step 3

• Insert a prying tool between the screen and the metal backing of the phone at the bottom to remove backing from phone.
• There will be a thin film connecting the two pieces. You do not need to remove this. Just fold the two pieces apart with the inside facing up.

Insert a prying tool between the screen and the metal backing of the phone at the bottom to remove backing from phone.

There will be a thin film connecting the two pieces. You do not need to remove this. Just fold the two pieces apart with the inside facing up.

Step 4

• Remove the two 3 mm screws, using the Phillips #00 screwdriver, on the silver band at the top of the battery and remove the band.

Remove the two 3 mm screws, using the Phillips #00 screwdriver, on the silver band at the top of the battery and remove the band.

Step 5

• Peel back the silver tape.

Peel back the silver tape.

Step 6

• Disconnect the battery connections.

Disconnect the battery connections.

Step 7

• Pry and remove the battery.
• The underside of the battery is adhesive so make sure to pry the battery off gently.

Pry and remove the battery.

The underside of the battery is adhesive so make sure to pry the battery off gently.

Step 8

              Speaker/Charger Port/Headphone Jack               

• Remove all screws 3mm, using the Phillips #00 screwdriver, at the bottom of the device.

Remove all screws 3mm, using the Phillips #00 screwdriver, at the bottom of the device.

Step 9

• Remove the black piece.

Remove the black piece.

Step 10

• Unplug the wires.

Unplug the wires.

Step 11

• Using the pry tool, pry up the circular piece and remove the board.

Using the pry tool, pry up the circular piece and remove the board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Henry Barrett                     

Member since: 09/10/2018

537 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       University of Alabama, Team S2-G7, Bedsole Fall 2018                        

                                                  Member of University of Alabama, Team S2-G7, Bedsole Fall 2018 



                    UA-BEDSOLE-F18S2G7                     


                                            4 Members                     


                                            10 Guides authored