Difficulty
Easy
Steps
6
Time Required
7 minutes
Sections
1
- Charging Port
- 6 steps
Flags
3
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Better Introduction
Improve this guide by completing or revising its introduction.
BackAsus ZenFone 5 Lite
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Charging Port
- Use a thin plastic tool to peel the back cover of the phone off. Once the plastic tool has begun to pry the back off, slide the plastic tool around the edges of the phone to separate the adhesive holding the back on. Once all edges of the phone are disconnected, lift the back cover off.
- Be careful to keep the cover and the rest of the phone close together so as not to break the connecting band between the touch sensor on the cover and the motherboard of the phone.
Use a thin plastic tool to peel the back cover of the phone off. Once the plastic tool has begun to pry the back off, slide the plastic tool around the edges of the phone to separate the adhesive holding the back on. Once all edges of the phone are disconnected, lift the back cover off.
Be careful to keep the cover and the rest of the phone close together so as not to break the connecting band between the touch sensor on the cover and the motherboard of the phone.
1024
Step 2
- Remove the seven Phillips #0 screws located on the bottom of the phone.
- One of the seven screws is covered by a white sticker with the letters “CS” on it. This screw can be removed with the sticker still attached. Simply pierce through the sticker with the screwdriver and unscrew as normal.
Remove the seven Phillips #0 screws located on the bottom of the phone.
One of the seven screws is covered by a white sticker with the letters “CS” on it. This screw can be removed with the sticker still attached. Simply pierce through the sticker with the screwdriver and unscrew as normal.
Step 3
- Use the nylon spudger to pry off the lower cover. Use the opening tool to help lift it off.
Use the nylon spudger to pry off the lower cover. Use the opening tool to help lift it off.
Step 4
- Use a prying tool to gently pry off the connection that was previously hidden by the black cover.
- Use one finger to hold down the charging port circuit board while prying off the connection to ensure it does not break.
Use a prying tool to gently pry off the connection that was previously hidden by the black cover.
Use one finger to hold down the charging port circuit board while prying off the connection to ensure it does not break.
Step 5
- Locate the gold-tipped black wire attached to the charging port circuit board.
- Insert the plastic prying tool underneath the silver clasp and pry it off.
Locate the gold-tipped black wire attached to the charging port circuit board.
Insert the plastic prying tool underneath the silver clasp and pry it off.
Step 6
- Insert a plastic prying tool on the left side of the charging port. Gently lift up the charging port and then remove using your hand.
Insert a plastic prying tool on the left side of the charging port. Gently lift up the charging port and then remove using your hand.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Philipp Tolxdorf
Member since: 02/25/2019
267 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Purdue University Northwest, Team S4-G6, Hingst Spring 2019
Member of Purdue University Northwest, Team S4-G6, Hingst Spring 2019
PNW-HINGST-S19S4G6
5 Members
4 Guides authored
