Difficulty

Easy

Steps

6

Time Required

                          5 minutes

Sections

2

  • Battery
  • 4 steps
  • Front Facing Camera
  • 2 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackASUS ZenPad S 8.0 (Z580C)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Cover Removal
  • if present, remove the MicroSD card before disassembly. Failure to remove could lead to damage to the MicroSD card , rear cover, or MicroSD card slot.
  • Use the plastic tool to pry between the silver bezel and the back case
  • Work the tool around the device to free the back case

if present, remove the MicroSD card before disassembly. Failure to remove could lead to damage to the MicroSD card , rear cover, or MicroSD card slot.

Use the plastic tool to pry between the silver bezel and the back case

Work the tool around the device to free the back case

1024

Step 2

  • Remove the ribbon cables by lifting up the white retaining flap on the ZIF connectors, then pulling the ribbon cable away.
  • Do not kink the ribbon cables as they can break easily

Remove the ribbon cables by lifting up the white retaining flap on the ZIF connectors, then pulling the ribbon cable away.

Do not kink the ribbon cables as they can break easily

Step 3

  • Remove the battery connector by prying it up away from the device using 2 plastic pry tools

Remove the battery connector by prying it up away from the device using 2 plastic pry tools

Step 4

  • Remove all 9 of the 1.5mm #00 Philips screws
  • Gently lift the battery out of the device
  • Use an opening pick or similar tool to separate the adhesive on the bottom and top of the battery.

Remove all 9 of the 1.5mm #00 Philips screws

Gently lift the battery out of the device

Use an opening pick or similar tool to separate the adhesive on the bottom and top of the battery.

Step 5

              Front Facing Camera
  • Use a plastic opening tool to lift the black retaining flap on the ZIF Connector

Use a plastic opening tool to lift the black retaining flap on the ZIF Connector

Step 6

  • Use a tweezers to lift out the camera
  • If you lifted the latch for the ribbon cable then it should come out with little resistance.

Use a tweezers to lift out the camera

If you lifted the latch for the ribbon cable then it should come out with little resistance.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    John Astfanous

Member since: 10/04/2016

948 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 2-2, Cagle Fall 2016                        

                                                  Member of USF Tampa, Team 2-2, Cagle Fall 2016 



                    USFT-CAGLE-F16S2G2                     


                                            4 Members                     


                                            5 Guides authored