Difficulty
Moderate
Steps
4
Time Required
5 minutes
Sections
1
- Camera
- 4 steps
Flags
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackASUS ZenPad Z8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Camera
- Turn off the power. The tablet has a hard power switch located on the right side.
Turn off the power. The tablet has a hard power switch located on the right side.
1024
Step 2
- Unscrew the screws located on the bottom and use the prying tool to open the tablet.
Unscrew the screws located on the bottom and use the prying tool to open the tablet.
Step 3
- Unscrew the two screws that hold the camera onto the back cover. Each screw is located on either side of the camera.
- Remove the camera cover piece.
Unscrew the two screws that hold the camera onto the back cover. Each screw is located on either side of the camera.
Remove the camera cover piece.
Step 4
- Use a prying tool to separate the camera, then pull to completely remove it.
- Reinstall the new camera, camera cover, and screws.
Use a prying tool to separate the camera, then pull to completely remove it.
Reinstall the new camera, camera cover, and screws.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
mohamed sharif
Member since: 02/04/2019
121 Reputation
1 Guide authored
Badges:
3
Team
Gateway, Team S1-G4, Saknee Spring 2019
Member of Gateway, Team S1-G4, Saknee Spring 2019
GCC-SAKNEE-S19S1G4
4 Members
1 Guide authored
