At T Nvg510 Button Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Reset and Wi-Fi Buttons
6 steps

Flags

BackMotorola NVG510
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Reset and Wi-Fi Buttons

Place the router on one side so that the rubber stands are facing upward.
Remove the stands from the left corners only, relative to the AT&T logo if facing upright.

Place the router on one side so that the rubber stands are facing upward.

Remove the stands from the left corners only, relative to the AT&T logo if facing upright.

1024

Step 2

Remove two screws using a 2.0 flathead screwdriver.

Remove two screws using a 2.0 flathead screwdriver.

Step 3

Pry open the case to reveal the board.
Some force may be required.
Take out the one screw located on the center-right area of the board.

Pry open the case to reveal the board.

Some force may be required.

Take out the one screw located on the center-right area of the board.

Step 4

Lift the board slowly out of the case.
Be careful as to not damage the board.

Lift the board slowly out of the case.

Be careful as to not damage the board.

Step 5

Locate the buttons to the right of the yellow ports along the edge of the board.

Locate the buttons to the right of the yellow ports along the edge of the board.

Step 6

Locate the silver points that connect the buttons to the board.
To release the buttons, use a soldering iron to heat up and melt the silver connecting points.
Avoid touching the solder to the board. Touch only the silver points.

Locate the silver points that connect the buttons to the board.

To release the buttons, use a soldering iron to heat up and melt the silver connecting points.

Avoid touching the solder to the board. Touch only the silver points.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 7 other contributors

                    Shawn Rogers

Member since: 06/01/2016

176 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Central Coast New Tech High, Team 7-4, Rushing Spring 2016                        

                                                  Member of Central Coast New Tech High, Team 7-4, Rushing Spring 2016 



                    CCNTH-RUSHING-S16S7G4                     


                                            2 Members                     


                                            1 Guide authored

Introduction#

What you need#

Team#

Introduction

What you need

Team