Atari Flashback 2 Joystick Button Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 - 20 minutes            

Sections

1

• Joystick Button
• 4 steps

Flags

0

• BackAtari Flashback 2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Joystick Button               

• Using the screwdriver and the PH1 bit, unscrew the four 10.0 mm screws on the bottom of the joystick.
• Remove the bottom panel from the joystick.

Using the screwdriver and the PH1 bit, unscrew the four 10.0 mm screws on the bottom of the joystick.

Remove the bottom panel from the joystick.

1024

Step 2

• Unscrew the single 8.0 mm Phillips#1 screw holding the circuit board in place.
• Remove the circuit board from the joystick housing.

Unscrew the single 8.0 mm Phillips#1 screw holding the circuit board in place.

Remove the circuit board from the joystick housing.

Step 3

• Inspect the circuit board for dirt, corrosion or damage. If necessary, clean the indicated contact using a cotton swab.

Inspect the circuit board for dirt, corrosion or damage. If necessary, clean the indicated contact using a cotton swab.

Step 4

• Remove the button from the joystick housing. Check for dirt or debris that may obstruct its movement. If the button is broken, replace it.

Remove the button from the joystick housing. Check for dirt or debris that may obstruct its movement. If the button is broken, replace it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Daniel Hoffman                     

Member since: 09/17/2018

209 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Washington State, Team S1-G2, Hope Fall 2018                        

                                                  Member of Washington State, Team S1-G2, Hope Fall 2018 



                    WSU-HOPE-F18S1G2                     


                                            4 Members                     


                                            11 Guides authored