Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes

Sections

1

  • Joystick
  • 5 steps

Flags

0

  • BackAtari Flashback 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Joystick
  • Using the screwdriver and the PH1 bit, unscrew the four 10.0 mm screws on the bottom of the joystick.
  • Remove the bottom panel from the joystick.

Using the screwdriver and the PH1 bit, unscrew the four 10.0 mm screws on the bottom of the joystick.

Remove the bottom panel from the joystick.

1024

Step 2

  • Use the screwdriver with the PH1 bit to remove the one 10.0 mm screw on the circuit board.
  • Remove the circuit board.

Use the screwdriver with the PH1 bit to remove the one 10.0 mm screw on the circuit board.

Remove the circuit board.

Step 3

  • Remove the rubber pad from the joystick.

Remove the rubber pad from the joystick.

Step 4

  • Using a plastic opening tool, poke into the six notches around the bottom of the joystick housing.
  • The joystick’s rubber boot will come loose, but stay in place.

Using a plastic opening tool, poke into the six notches around the bottom of the joystick housing.

The joystick’s rubber boot will come loose, but stay in place.

Step 5

  • The joystick will now unscrew (counter-clockwise) and you can disassemble the top of the controller into these four parts.

The joystick will now unscrew (counter-clockwise) and you can disassemble the top of the controller into these four parts.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Faith Julian

Member since: 09/18/2018

205 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       Washington State, Team S1-G2, Hope Fall 2018                        

                                                  Member of Washington State, Team S1-G2, Hope Fall 2018 



                    WSU-HOPE-F18S1G2                     


                                            4 Members                     


                                            11 Guides authored