Atari Flashback 2 Reset And Select Button Replacement Repair Guide

Difficulty

Moderate

Steps

2

Time Required

                          30 minutes            

Sections

1

• Reset or Select Button
• 2 steps

Flags

0

• BackAtari Flashback 2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Reset or Select Button               

• Using the screwdriver and the PH1 bit, unscrew the five 10.0 mm screws on the bottom of the console.
• One screw is under the main sticker in the middle of the console.

Using the screwdriver and the PH1 bit, unscrew the five 10.0 mm screws on the bottom of the console.

One screw is under the main sticker in the middle of the console.

1024

Step 2

• Unscrew the six 9.0 mm Phillips #1 screws on the brown circuit board that correspond to the reset and select buttons.
• Remove gently. The circuit board is connected by wire to the console. Removing the cable from the console case may allow more slack.

Unscrew the six 9.0 mm Phillips #1 screws on the brown circuit board that correspond to the reset and select buttons.

Remove gently. The circuit board is connected by wire to the console. Removing the cable from the console case may allow more slack.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Gabriel Robinson                     

Member since: 09/17/2018

85 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Washington State, Team S1-G2, Hope Fall 2018                        

                                                  Member of Washington State, Team S1-G2, Hope Fall 2018 



                    WSU-HOPE-F18S1G2                     


                                            4 Members                     


                                            11 Guides authored                     

pradose - Aug 26, 2019

Reply

Good night! I have a flashback2 atari which burst the capacitor EC1, could you help me with its value? Thank you!

Daniel Hoffman - Aug 28, 2019

Reply

Hi pradose! We no longer have the device so it will not be possible for our team to walk you through anything beyond the guides we posted.