Difficulty

Difficult

Steps

8

Time Required

                          15 - 30 minutes

Sections

2

  • Atari Lynx
  • 4 steps
  • Battery Wires
  • 4 steps

Flags

0

  • BackAtari Lynx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Atari Lynx
  • Before disassembling your Atari Lynx, be sure the device is powered off.
  • Remove any game in the console by opening the right latch and sliding the game to the right.

Before disassembling your Atari Lynx, be sure the device is powered off.

Remove any game in the console by opening the right latch and sliding the game to the right.

1024

Step 2

  • Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.
  • Pinch the rear panel with your fingers and lift away from the Atari.

Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.

Pinch the rear panel with your fingers and lift away from the Atari.

Step 3

  • Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.
  • Be sure not to tear any wires attached to battery panel.

Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.

Be sure not to tear any wires attached to battery panel.

Step 4

  • Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.
  • Be sure not to tear the speaker wire while removing the control panel.

Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.

Be sure not to tear the speaker wire while removing the control panel.

Step 5

              Battery Wires
  • Desolder both the black and red wire as shown.
  • If you need help with basic desoldering, click here.

Desolder both the black and red wire as shown.

If you need help with basic desoldering, click here.

Step 6

  • Desolder the black wire as shown.

Desolder the black wire as shown.

Step 7

  • Desolder the white wire and then the red wire as shown.

Desolder the white wire and then the red wire as shown.

Step 8

  • Desolder the white wire as shown in order for the battery pack to be completely removed from the device.

Desolder the white wire as shown in order for the battery pack to be completely removed from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    John Lopez

Member since: 01/27/2014

443 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 1-42, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 1-42, Maness Winter 2014 



                    CPSU-MANESS-W14S1G42                     


                                            5 Members                     


                                            14 Guides authored