Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
1
- Back Panel
- 3 steps
Flags
0
BackATT CL2940
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove five 9.5 mm Phillips #1 screws from the back panel of the phone.
Remove five 9.5 mm Phillips #1 screws from the back panel of the phone.
1024
Step 2
- Slide the metal spudger into the crack and continue around to the front panel of the phone.
- Be careful not to break the clips that hold the back panel to the front panel.
Slide the metal spudger into the crack and continue around to the front panel of the phone.
Be careful not to break the clips that hold the back panel to the front panel.
Step 3
- When setting the back panel down, be careful to not rip any of the wires off of the internal components.
When setting the back panel down, be careful to not rip any of the wires off of the internal components.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 8 other contributors
Charles Messmore
Member since: 02/15/2016
541 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
IUPUI, Team 1-1, Harley Spring 2016
Member of IUPUI, Team 1-1, Harley Spring 2016
IUPUI-HARLEY-S16S1G1
4 Members
13 Guides authored
