Att Cl2940 Handset Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes

Sections

Handset Speaker
5 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackATT CL2940
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

In order to complete this guide you will need to solder/desolder. If you are not familiar with this process, read about it in our Soldering guide.

What you need

Step 1

              Handset Speaker

Separate the two sections of the handset by pushing them apart with the tip of the metal spudger or opening tool.

Separate the two sections of the handset by pushing them apart with the tip of the metal spudger or opening tool.

1024

Step 2

Continue separating the two sections by using the metal spudger all the way around the edge of the handset.

Continue separating the two sections by using the metal spudger all the way around the edge of the handset.

Step 3

After separating the two sections of the handset, it should look as shown.

After separating the two sections of the handset, it should look as shown.

Step 4

Pull the speaker out gently to detach it from the handset. The speaker is located at the top end of the handset. It is the circular white piece with red and greed wires connected to it.
The speaker is attached to the handset with a slightly sticky adhesive.

Pull the speaker out gently to detach it from the handset. The speaker is located at the top end of the handset. It is the circular white piece with red and greed wires connected to it.

The speaker is attached to the handset with a slightly sticky adhesive.

Step 5

Use a soldering iron to melt the existing solder off of both the red and green wires in order to completely remove the speaker.

Use a soldering iron to melt the existing solder off of both the red and green wires in order to completely remove the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors

                    Noor Assaf

Member since: 02/15/2016

306 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       IUPUI, Team 1-1, Harley Spring 2016                        

                                                  Member of IUPUI, Team 1-1, Harley Spring 2016 



                    IUPUI-HARLEY-S16S1G1                     


                                            4 Members                     


                                            13 Guides authored

Better Introduction#

Introduction#

What you need#

Team#

Better Introduction

Introduction

What you need

Team