Difficulty

Moderate

Steps

5

Time Required

                          35 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Phone Jack
  • 2 steps

Flags

0

  • BackATT CL2940

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before beginning this project, it is always important to make sure you have the correct tools for the job. The tools that are needed are the pro tech tool kit, precision tweezers set and the metal spudger set. Once all these are acquired just follow the directions for an easy fix.

What you need

Step 1

              Back Panel
  • Remove five 9.5 mm Phillips #1 screws from the back panel of the phone.

Remove five 9.5 mm Phillips #1 screws from the back panel of the phone.

1024

Step 2

  • Slide the metal spudger into the crack and continue around to the front panel of the phone.
  • Be careful not to break the clips that hold the back panel to the front panel.

Slide the metal spudger into the crack and continue around to the front panel of the phone.

Be careful not to break the clips that hold the back panel to the front panel.

Step 3

  • When setting the back panel down, be careful to not rip any of the wires off of the internal components.

When setting the back panel down, be careful to not rip any of the wires off of the internal components.

Step 4

              Phone Jack
  • Using the precision tweezers, bend the golden tips of the green and red wires upward.
  • The wires are pulled out from two of the six holes. Make sure you remember which holes you pulled the wires out from.
  • Bend the wires slowly and gently to avoid breaking them.

Using the precision tweezers, bend the golden tips of the green and red wires upward.

The wires are pulled out from two of the six holes. Make sure you remember which holes you pulled the wires out from.

Bend the wires slowly and gently to avoid breaking them.

Step 5

  • After bending the golden wire tips, pull the wires out from the back side of the phone jack.

After bending the golden wire tips, pull the wires out from the back side of the phone jack.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    Noor Assaf

Member since: 02/15/2016

306 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       IUPUI, Team 1-1, Harley Spring 2016                        

                                                  Member of IUPUI, Team 1-1, Harley Spring 2016 



                    IUPUI-HARLEY-S16S1G1                     


                                            4 Members                     


                                            13 Guides authored