Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
2
- Back Cover
- 2 steps
- Battery
- 2 steps
Flags
0
BackATT Trek HD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- To separate the screen from the back panel, run the plastic opening tool along the outer edge of the device.
To separate the screen from the back panel, run the plastic opening tool along the outer edge of the device.
1024
Step 2
- Pull the screen away from the back panel.
Pull the screen away from the back panel.
Step 3
Battery
- Use a Phillips #00 screwdriver to remove the six 2.5 mm screws located around the perimeter of the battery.
Use a Phillips #00 screwdriver to remove the six 2.5 mm screws located around the perimeter of the battery.
Step 4
- Use the plastic opening tool to disconnect the black battery connector.
- Gently lift the battery out of the device.
Use the plastic opening tool to disconnect the black battery connector.
Gently lift the battery out of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Hunter Barger
Member since: 01/16/2019
329 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
University of Alabama, Team S1-G3, Bedsole Spring 2019
Member of University of Alabama, Team S1-G3, Bedsole Spring 2019
UA-BEDSOLE-S19S1G3
4 Members
6 Guides authored
