Difficulty

Moderate

Steps

8

Time Required

                          20 minutes

Sections

3

  • ATT Trimline 210M Back Cover Disassembly
  • 4 steps
  • ATT Trimline 210M Motherboard Disassembly
  • 2 steps
  • Microphone
  • 2 steps

Flags

0

  • BackATT Trimline 210M

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              ATT Trimline 210M Back Cover Disassembly
  • Open up the phone with a metal spudger, sticking it in the bottom near the cord jack entry.
  • Be careful with the amount of force you use, or the plastic may crack.

Open up the phone with a metal spudger, sticking it in the bottom near the cord jack entry.

Be careful with the amount of force you use, or the plastic may crack.

1024

Step 2

  • Pull up on the spudger while simultaneously pulling up the top shell of the phone.

Pull up on the spudger while simultaneously pulling up the top shell of the phone.

Step 3

  • After unclipping the bottom half of the shell, pull upward from the position shown in the picture to detach the top half of the shell.
  • The cord connecting the speaker is short, and may detach if not done carefully.

After unclipping the bottom half of the shell, pull upward from the position shown in the picture to detach the top half of the shell.

The cord connecting the speaker is short, and may detach if not done carefully.

Step 4

  • You will have the motherboard and speaker exposed to you.

You will have the motherboard and speaker exposed to you.

Step 5

              ATT Trimline 210M Motherboard Disassembly
  • Remove the two 10 mm screws using the 1/4" driver and a J1 Phillips screw head.

Remove the two 10 mm screws using the 1/4" driver and a J1 Phillips screw head.

Step 6

  • Carefully move the motherboard up to remove it.

Carefully move the motherboard up to remove it.

Step 7

              Microphone
  • Use metal spudger to remove the microphone

Use metal spudger to remove the microphone

Step 8

  • Carefully detach the black and red wires.

Carefully detach the black and red wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Corey

Member since: 02/10/2016

343 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 4-2, Lacy Spring 2016                        

                                                  Member of USF Tampa, Team 4-2, Lacy Spring 2016 



                    USFT-LACY-S16S4G2                     


                                            4 Members                     


                                            12 Guides authored