Difficulty

Easy

Steps

10

Time Required

                          20 - 25 minutes

Sections

1

  • Belt Drive
  • 10 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackTurntable

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before using this guide, make sure the size of the new belt is designed specifically for this model to avoid motor overheat problem.

What you need

Step 1

              Belt Drive
  • Open the top plastic cover and remove the record and rubber mat.

Open the top plastic cover and remove the record and rubber mat.

1024

Step 2

  • Find the belt underneath the platter by rotating the platter to the correct place.
  • Remove the belt from the motor pulley.

Find the belt underneath the platter by rotating the platter to the correct place.

Remove the belt from the motor pulley.

Step 3

  • Take the platter off by pulling it straight up.

Take the platter off by pulling it straight up.

Step 4

  • Remove the old belt.

Remove the old belt.

Step 5

  • Turn platter upside down.

Turn platter upside down.

Step 6

  • Place the new belt around the inner lap on the upside-down platter.
  • Make sure the rubber band is flat on the platter, with no flipping.

Place the new belt around the inner lap on the upside-down platter.

Make sure the rubber band is flat on the platter, with no flipping.

Step 7

  • Turn the platter around.
  • Grab the belt around with a finger through one of the holes in the platter.

Turn the platter around.

Grab the belt around with a finger through one of the holes in the platter.

Step 8

  • Put the platter straight down.

Put the platter straight down.

Step 9

  • Put the belt around the motor pulley.

Put the belt around the motor pulley.

Step 10

  • Test the function by spinning the platter and put the rubber mat into place.

Test the function by spinning the platter and put the rubber mat into place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Zonghao Li

Member since: 01/20/2021

181 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S1-G15, Melo-Thaiss Winter 2021                        

                                                  Member of York University, Team S1-G15, Melo-Thaiss Winter 2021 



                    YORK-MELO-THAISS-W21S1G15                     


                                            1 Member                     


                                            1 Guide authored