Audio Technica Ath S200Bt Microphone Hole Fix Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          9 minutes            

Sections

1

• Audio-Technica ATH-S200BT Microphone Hole Fix
• 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackAudio-Technica ATH-S200BT

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

To fix this issue, you should teardown the left monitor and drill a hole about 1 mm hole in front of the mic.

Step 1

              Audio-Technica ATH-S200BT Microphone Hole Fix               

• Remove the 3 screws holding the left headphone cup together.

Remove the 3 screws holding the left headphone cup together.

1024

Step 2

• Separate the three enclosure parts by hand.

Separate the three enclosure parts by hand.

Step 3

• Drill a hole about 1 - 1.5mm hole.

Drill a hole about 1 - 1.5mm hole.

Step 4

• Reassemble the headphone PCB.

Reassemble the headphone PCB.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    yodji suzuki                     

Member since: 05/07/2019

356 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Fedor - Dec 7, 2019

Reply

Thanks.

The microphone sound got better.

Александр Орлов - Jul 26, 2020

Reply

я просверлил отверстие диаметром 0,9 мм, и этого оказалось достаточно.

laurentiuzorici - Mar 5, 2022

Reply

Thanks!

Did this too so now my mic works great!

Teh BuG - May 11, 2022

Reply

Did this last night. Previously, no one could even hear me with the headset’s mic. Afterwards I had a half hour call with my grandmother, walking down a busy street, without issue.

I did find that when you disassemble the ear cup, take the grey part out with the driver. A spudger or pry bar was needed for me.

yodji suzuki - May 11, 2022

great deal!!