Difficulty

Difficult

Steps

7

Time Required

                          10 - 15 minutes

Sections

2

  • Top-Casing
  • 5 steps
  • Power Adapter
  • 2 steps

Flags

0

  • BackAudiovox CR8030iE5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Note: This guide involves soldering and should not be done by children. If you do not know how to solder, check out How To Solder and Desolder Connections to learn how before beginning this guide.

What you need

Step 1

              Top-Casing
  • Turn the device upside down.
  • Apply constant pressure to the base of your Audiovox, while holding the plastic casing until the casing is completely removed.

Turn the device upside down.

Apply constant pressure to the base of your Audiovox, while holding the plastic casing until the casing is completely removed.

1024

Step 2

  • Remove the four screws from the base using a Phillips #1 screwdriver.

Remove the four screws from the base using a Phillips #1 screwdriver.

Step 3

  • Turn the device right-side up.
  • Gently pull the top panel off of the device.

Turn the device right-side up.

Gently pull the top panel off of the device.

Step 4

  • Using a Phillips #1 screwdriver, remove the screw found in the middle of the board.

Using a Phillips #1 screwdriver, remove the screw found in the middle of the board.

Step 5

  • Pull back the board gently to avoid disconnecting the attached wires.
  • This allows you to view the soldered connections on the other side, and the internal components.

Pull back the board gently to avoid disconnecting the attached wires.

This allows you to view the soldered connections on the other side, and the internal components.

Step 6

              Power Adapter
  • One by one, de-solder the two wires that connect the power adapter to your Audiovox.
  • If you don’t know how to solder, check out How To Solder and Desolder Connections.
  • Soldering irons are extremely hot and can burn you if you touch them!
  • If you hold the soldering iron tip at the same spot for too long, it can strip the metal from the plastic board. You may not be able to solder wire to that point again.

One by one, de-solder the two wires that connect the power adapter to your Audiovox.

If you don’t know how to solder, check out How To Solder and Desolder Connections.

Soldering irons are extremely hot and can burn you if you touch them!

If you hold the soldering iron tip at the same spot for too long, it can strip the metal from the plastic board. You may not be able to solder wire to that point again.

Step 7

  • Insert the wires of the new adapter into the designated holes and solder them into place.
  • If you don’t know how to solder, check out How To Solder and Desolder Connections.
  • Soldering irons are extremely hot and can burn you if you touch them!
  • If you hold the soldering iron tip at the same spot for too long, it can strip the metal from the plastic board. You may not be able to solder wire to that point again.

Insert the wires of the new adapter into the designated holes and solder them into place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Savannah Smith

Member since: 04/18/2013

51 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 10-39, Amido Spring 2013                        

                                                  Member of Cal Poly, Team 10-39, Amido Spring 2013 



                    CPSU-AMIDO-S13S10G39                     


                                            4 Members                     


                                            6 Guides authored