Audiovox Cr8030Ie5 Top Casing Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes            

Sections

1

• Top-Casing
• 5 steps

Flags

0

• BackAudiovox CR8030iE5

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Top-Casing               

• Turn the device upside down.
• Apply constant pressure to the base of your Audiovox, while holding the plastic casing until the casing is completely removed.

Turn the device upside down.

Apply constant pressure to the base of your Audiovox, while holding the plastic casing until the casing is completely removed.

1024

Step 2

• Remove the four screws from the base using a Phillips #1 screwdriver.

Remove the four screws from the base using a Phillips #1 screwdriver.

Step 3

• Turn the device right-side up.
• Gently pull the top panel off of the device.

Turn the device right-side up.

Gently pull the top panel off of the device.

Step 4

• Using a Phillips #1 screwdriver, remove the screw found in the middle of the board.

Using a Phillips #1 screwdriver, remove the screw found in the middle of the board.

Step 5

• Pull back the board gently to avoid disconnecting the attached wires.
• This allows you to view the soldered connections on the other side, and the internal components.

Pull back the board gently to avoid disconnecting the attached wires.

This allows you to view the soldered connections on the other side, and the internal components.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 8 other contributors 

                    Savannah Smith                     

Member since: 04/18/2013

51 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 10-39, Amido Spring 2013                        

                                                  Member of Cal Poly, Team 10-39, Amido Spring 2013 



                    CPSU-AMIDO-S13S10G39                     


                                            4 Members                     


                                            6 Guides authored