Difficulty

Moderate

Steps

3

Time Required

                          10 minutes

Sections

1

  • Keypad
  • 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAudiovox Tri-mode CDM 9000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Keypad
  • Flip your phone over so the screen is facing down.
  • About half way down there is a small button with a few groves. Push this button in an upward fashion. This will release the battery from the back of the cell phone.

Flip your phone over so the screen is facing down.

About half way down there is a small button with a few groves. Push this button in an upward fashion. This will release the battery from the back of the cell phone.

1024

Step 2

  • Once the battery has been removed, you will need a small Phillips 60 mm screwdriver. Remove the two 1.2mm Phillips #1 screws on the back of the phone.
  • Use a spudger tool to pry apart the phone. It may be a little difficult to pry open. Use the flat part of the spudger tool and go all around the phone. It will come apart.

Once the battery has been removed, you will need a small Phillips 60 mm screwdriver. Remove the two 1.2mm Phillips #1 screws on the back of the phone.

Use a spudger tool to pry apart the phone. It may be a little difficult to pry open. Use the flat part of the spudger tool and go all around the phone. It will come apart.

Step 3

  • Once you have the phone apart simply remove the key pad and replace it with the new one.
  • Don’t forget to put the screws back in. Place the battery back on the phone.
  • Push the two parts of the phone back together. You will here a loud click when the phone is back together.

Once you have the phone apart simply remove the key pad and replace it with the new one.

Don’t forget to put the screws back in. Place the battery back on the phone.

Push the two parts of the phone back together. You will here a loud click when the phone is back together.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Summer Sines

Member since: 09/27/2014

379 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014                        

                                                  Member of USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014 



                    USFSM-STEWART-F14S1G3                     


                                            3 Members                     


                                            14 Guides authored