August Smart Lock Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 - 25 minutes

Sections

Speaker
4 steps

Flags

BackAugust Smart Lock
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker

Flip the device so the back cover is facing you.
Undo the latches on both sides to remove the metal cover.
Using a Phillips #0 screwdriver, remove the black screws to release the back cover.
To unscrew all of the screws, you will need to close the latches again.
Do not pull the cover apart too far as the speaker is in the cover and connected to the motherboard.

Flip the device so the back cover is facing you.

Undo the latches on both sides to remove the metal cover.

Using a Phillips #0 screwdriver, remove the black screws to release the back cover.

To unscrew all of the screws, you will need to close the latches again.

Do not pull the cover apart too far as the speaker is in the cover and connected to the motherboard.

1024

Step 2

Use the metal spudger to pry the plug off of the motherboard.
The plug can be dislodged when prying it from the side.

Use the metal spudger to pry the plug off of the motherboard.

The plug can be dislodged when prying it from the side.

Step 3

Warm up the iOpener.
Do not place the iOpener in microwave for more than 30 seconds.
Place the iOpener heating pad over the speaker and let sit for a few moments.
Using the metal spudger, pry some of the glue off the hinges holding the speaker in place.

Warm up the iOpener.

Do not place the iOpener in microwave for more than 30 seconds.

Place the iOpener heating pad over the speaker and let sit for a few moments.

Using the metal spudger, pry some of the glue off the hinges holding the speaker in place.

Step 4

Once the speaker looks mobile, flip the cover over and push below the speaker to pop it out.

Once the speaker looks mobile, flip the cover over and push below the speaker to pop it out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    William Fink

Member since: 09/26/2017

670 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team S11-G6, Passmore Fall 2017                        

                                                  Member of USF Tampa, Team S11-G6, Passmore Fall 2017 



                    USFT-PASSMORE-F17S11G6                     


                                            4 Members                     


                                            3 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team