Automatic Coffee Machine Cecotec Power Matic Ccino 7000 Or Rooma Rm A7 Disassembly Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Automatic Coffee Machine Cecotec Power Matic-Ccino 7000 or Rooma RM-A7 Disassembly
5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackAutomatic Coffee Machine Cecotec Power Matic-ccino 7000 or Rooma RM-A7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Taking Main cover off

Using a T10 screwdriver, remove the eight screws located on the rear panel of the device (4 towards the bottom, and 4 towards the top).

Using a T10 screwdriver, remove the eight screws located on the rear panel of the device (4 towards the bottom, and 4 towards the top).

1024

Step 2

Unscrew one PH2 screw.
Use a spudger or a thin curved tool such as a dental pick to remove the bean hopper of the burr grinder.
Remove the grind selector by pulling the dial directly away from the machine which will remove it from the housing.

Unscrew one PH2 screw.

Use a spudger or a thin curved tool such as a dental pick to remove the bean hopper of the burr grinder.

Remove the grind selector by pulling the dial directly away from the machine which will remove it from the housing.

Step 3

The Hex screw must be unscrewed in the clockwise direction. Failure to do so could result in damage of the grinding mechanism.
Unscrew the one 4mm Hex in a clockwise fashion and remove the black plastic cover over the burrset.
Remove the black plastic cover over the burr set.
The burr set should not be completely visible.

The Hex screw must be unscrewed in the clockwise direction. Failure to do so could result in damage of the grinding mechanism.

Unscrew the one 4mm Hex in a clockwise fashion and remove the black plastic cover over the burrset.

Remove the black plastic cover over the burr set.

The burr set should not be completely visible.

Step 4

Unscrew the three PH2 screws.
Slide the top panel backwards to remove it.

Unscrew the three PH2 screws.

Slide the top panel backwards to remove it.

Step 5

Now you should have access to the internal components of the appliance.

Now you should have access to the internal components of the appliance.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors

                    Egas

Member since: 09/20/2010

161 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Zi repair                        

                                                  Member of Zi repair 



                    Business                     


                                            1 Member                     


                                            1 Guide authored

Member-Contributed Guide#

Introduction#

What you need#

Team#

Member-Contributed Guide

Introduction

What you need

Team