Automatic Tommy 20 Dart Accelerator Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 15 minutes

Sections

Splitting the Gun into Two Halves
2 steps
Ammo Drum Bushing
2 steps
Dart Accelerator
2 steps

Flags

BackAutomatic Tommy 20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Splitting the Gun into Two Halves

Locate the orange slider on the front side of the gun.
Pull the orange slider towards the back of the gun while lifting up on the nose the gun.

Locate the orange slider on the front side of the gun.

Pull the orange slider towards the back of the gun while lifting up on the nose the gun.

1024

Step 2

Remove the single 1/8 in. screw at the junction of the body and the nose using a Philips #00 Screwdriver.
Remove all parts within the chamber to be able to completely detach the nose of the gun.
Be careful to keep track of all the components for reassembly.

Remove the single 1/8 in. screw at the junction of the body and the nose using a Philips #00 Screwdriver.

Remove all parts within the chamber to be able to completely detach the nose of the gun.

Be careful to keep track of all the components for reassembly.

Step 3

              Disassembling the Nose of the Gun

Remove all five 1/16 in. screws holding the nose of the gun together using a Phillips #00 screwdriver.
Look out for the hidden fifth screw behind the thin light green tape near the bushing itself. Peel the tape using your finger to gain access.

Remove all five 1/16 in. screws holding the nose of the gun together using a Phillips #00 screwdriver.

Look out for the hidden fifth screw behind the thin light green tape near the bushing itself. Peel the tape using your finger to gain access.

Step 4

              Removing the Bushing

Pick up the now split half of the nose of the gun that does not still have the orange tip attached to it.
Remove the bushing by simply pulling it away from the plastic.

Pick up the now split half of the nose of the gun that does not still have the orange tip attached to it.

Remove the bushing by simply pulling it away from the plastic.

Step 5

              Dart Accelerator

Unscrew the two screws holding the accelerator in place with a Phillips #00 screwdriver

Unscrew the two screws holding the accelerator in place with a Phillips #00 screwdriver

Step 6

              Removing the Accelerator

Pull back on the accelerator away from the plastic to remove from frame.
Be careful to not pull too quickly or too hard to avoid damaging the wiring.

Pull back on the accelerator away from the plastic to remove from frame.

Be careful to not pull too quickly or too hard to avoid damaging the wiring.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors

                    Reed Garmsen

Member since: 10/07/2014

468 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Cal Poly, Team 6-22, Maness Fall 2014                        

                                                  Member of Cal Poly, Team 6-22, Maness Fall 2014 



                    CPSU-MANESS-F14S6G22                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team