Difficulty

Moderate

Steps

4

Time Required

                          3 minutes

Sections

1

  • Autosampler Programming (For Old & New Versions)
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackOpen-Storm Hardware

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Turn on battery and autosampler
    1. Switch battery “ON”.
    1. Autosampler: Push “ON” button.
  • It will say …STANDBY…

  1. Switch battery “ON”.

  2. Autosampler: Push “ON” button.

It will say …STANDBY…

1024

Step 2

              Select Program Mode
    1. Push “ENTER/PROGRAM” button to see the “[PROGRAM, CONFIGURE] SAMPLER” screen. Push “ENTER/PROGRAM” button to select “PROGRAM”.
    1. This will bring up the “[TIME, FLOW] PACED SAMPLING” screen. Use arrow to select “FLOW” then push “ENTER/PROGRAM” button.

  1. Push “ENTER/PROGRAM” button to see the “[PROGRAM, CONFIGURE] SAMPLER” screen. Push “ENTER/PROGRAM” button to select “PROGRAM”.

  2. This will bring up the “[TIME, FLOW] PACED SAMPLING” screen. Use arrow to select “FLOW” then push “ENTER/PROGRAM” button.

Step 3

              Set Number, Type, and Size of Samples
    1. New screen shows: “SAMPLE EVERY __ PULSES.” Press 20. Then push the “ENTER/PROGRAM” button.
    1. New screen will read: “MULTIPLEX SAMPLES?” Use arrow to select “NO”. Then push the “ENTER/PROGRAM” button.
    1. New screen will read: “SAMPLE VOLUMES OF “____” ML”. Press 1000. Then push the “ENTER/PROGRAM” button.

  1. New screen shows: “SAMPLE EVERY __ PULSES.” Press 20. Then push the “ENTER/PROGRAM” button.

  2. New screen will read: “MULTIPLEX SAMPLES?” Use arrow to select “NO”. Then push the “ENTER/PROGRAM” button.

  3. New screen will read: “SAMPLE VOLUMES OF “____” ML”. Press 1000. Then push the “ENTER/PROGRAM” button.

Step 4

              Starting Sampling
    1. New screen will read: “ENTER START TIME?” Use arrow to select “NO”. Then push the “ENTER/PROGRAM” button. New screen: “PROGRAMMING SEQUENCE COMPLETE…”. Then screen will read: “PROGRAM HALTED”.
    1. Push “START SAMPLING” button. Screen will read: “[START, RESUME] SAMPLING PROGRAM?” Push “ENTER/PROGRAM” button to “START”. Then push “ENTER/PROGRAM” button again to “START SAMPLING AT BOTTLE 1”.
    1. Then should see on screen: “START FLOW COUNT AT :” (time).
  • It will take some time before it starts sampling.
  • Eventually screen will show: " BOTTLE 1 AFTER 20 PULSES".

  1. New screen will read: “ENTER START TIME?” Use arrow to select “NO”. Then push the “ENTER/PROGRAM” button. New screen: “PROGRAMMING SEQUENCE COMPLETE…”. Then screen will read: “PROGRAM HALTED”.

  2. Push “START SAMPLING” button. Screen will read: “[START, RESUME] SAMPLING PROGRAM?” Push “ENTER/PROGRAM” button to “START”. Then push “ENTER/PROGRAM” button again to “START SAMPLING AT BOTTLE 1”.

  3. Then should see on screen: “START FLOW COUNT AT :” (time).

It will take some time before it starts sampling.

Eventually screen will show: " BOTTLE 1 AFTER 20 PULSES".

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Brooke Mason

Member since: 05/29/2019

2,928 Reputation

                                      17 Guides authored                  



                       Badges:
                       21







                                                        +18 more badges

Team

                       Open-Storm                        

                                                  Member of Open-Storm 



                    Community                     


                                            14 Members                     


                                            24 Guides authored