Difficulty

Moderate

Steps

9

Time Required

                          20 - 25 minutes

Sections

1

  • Temperature Controller
  • 9 steps

Flags

0

  • BackTea Kettle

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Temperature Controller
  • Clean all the dirt on the bottom of the electric kettle.

Clean all the dirt on the bottom of the electric kettle.

1024

Step 2

  • Use a Phillips #0 screwdriver to remove the three 19 mm screws at the bottom of the electric kettle.
  • Remove the base of the electric kettle.
  • Remove the LED indicator buckled on the base.

Use a Phillips #0 screwdriver to remove the three 19 mm screws at the bottom of the electric kettle.

Remove the base of the electric kettle.

Remove the LED indicator buckled on the base.

Step 3

  • Use combination pliers to clamp the connection between the electric kettle line and the old temperature controller to create a gap, and pull it off.
  • Don’t use too much force to avoid damage to the line！

Use combination pliers to clamp the connection between the electric kettle line and the old temperature controller to create a gap, and pull it off.

Don’t use too much force to avoid damage to the line！

Step 4

  • Use combination pliers to remove the nuts holding down the old temperature controller.

Use combination pliers to remove the nuts holding down the old temperature controller.

Step 5

  • Remove the broken temperature controller.
  • Clean the bottom of the kettle to remove any dust or debris buildup.

Remove the broken temperature controller.

Clean the bottom of the kettle to remove any dust or debris buildup.

Step 6

  • Align the socket on the bottom of the new temperature controller with the protrusion on the bottom of the electric kettle to assemble.

Align the socket on the bottom of the new temperature controller with the protrusion on the bottom of the electric kettle to assemble.

Step 7

  • Use combination pliers to reinstall the nuts holding down the temperature controller.

Use combination pliers to reinstall the nuts holding down the temperature controller.

Step 8

  • Fasten the electric kettle circuit to the contact reed of the new temperature controller.
  • Gently pull the interface to ensure a firm installation.

Fasten the electric kettle circuit to the contact reed of the new temperature controller.

Gently pull the interface to ensure a firm installation.

Step 9

  • Re-buckle the removed LED indicator back to the base.
  • Buckle the base back to the bottom of the electric kettle.
  • Use a Phillips #0 screwdriver to three 19 mm screws on the bottom of the kettle.

Re-buckle the removed LED indicator back to the base.

Buckle the base back to the bottom of the electric kettle.

Use a Phillips #0 screwdriver to three 19 mm screws on the bottom of the kettle.

重新组装设备时，请依次相反的拆卸顺序。

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    SHAN HUANG

Member since: 01/13/2021

193 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       York University, Team S1-G30, O'Regan Winter 2021                        

                                                  Member of York University, Team S1-G30, O'Regan Winter 2021 



                    YORK-O'REGAN-W21S1G30                     


                                            1 Member                     


                                            2 Guides authored