Avertx Hd810 Dome Cover Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          4 minutes            

Sections

1

• Clear Dome Cover
• 3 steps

Flags

0

• BackAvertX HD810

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Clear Dome Cover               

• Lift off the paintable snap-on cover from the AvertX HD810 dome security camera.
• Optimally, the device should be turned off and the PoE (Power over Ethernet) unplugged.

Lift off the paintable snap-on cover from the AvertX HD810 dome security camera.

Optimally, the device should be turned off and the PoE (Power over Ethernet) unplugged.

1024

Step 2

• Loosen both 10mm screws on either side of the clear dome cover housing using a T10 Torx security screwdriver.
• It is not recommended to remove the screws from the clear dome cover housing. The screws are apart of the cover and not intended to come out.

Loosen both 10mm screws on either side of the clear dome cover housing using a T10 Torx security screwdriver.

It is not recommended to remove the screws from the clear dome cover housing. The screws are apart of the cover and not intended to come out.

Step 3

• Gently pull off the clear dome cover from the camera base.

Gently pull off the clear dome cover from the camera base.

You’ve successfully replaced your AvertX HD810 clear dome cover when you’ve snapped back on your paintable snap-on cover. You can reassemble your device at any point by following the steps in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Elisabeth Garcia                     

Member since: 01/18/2017

207 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Eastern Washington University, Team 2-3, Crane Winter 2017                        

                                                  Member of Eastern Washington University, Team 2-3, Crane Winter 2017 



                    EWU-CRANE-W17S2G3                     


                                            3 Members                     


                                            10 Guides authored