Difficulty

Moderate

Steps

7

Time Required

                          25 - 30 minutes

Sections

1

  • OLED Board
  • 7 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackAxe Empire 2.0

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The OLED Board is a screen on a paintball marker that allows you to see text and graphics of your devices settings. A malfunctioning OLED Board can cause your marker to make you unable to modify your devices setting, view important information, or unable to turn the device on at all.

A battery leaking battery acid is unsafe so I recommend you wear gloves when getting in the inside of your Axe Empire 2.0.

In step 1 of this guide, you will need to use an old toothbrush and possibly a rag. Since this device is used with players with other people and constantly getting hit with paint, cleaning out the Allen heads will ensure the correct Allen keys will fit.

What you need

Step 1

              OLED Board
  • Use an Allen key to remove four total screws.
  • 2.5 mm screws.
  • 1.2 mm screw.

Use an Allen key to remove four total screws.

2.5 mm screws.

1.2 mm screw.

1024

Step 2

  • Press and hold the release button while lightly pulling the spring bolt out.
  • If the spring bolt has not been serviced with lube after a long time you might need to pull harder. This is a great time to lube the spring bolt.

Press and hold the release button while lightly pulling the spring bolt out.

If the spring bolt has not been serviced with lube after a long time you might need to pull harder. This is a great time to lube the spring bolt.

Step 3

  • Remove the two main screws using a 2.5 mm Allen key to separate the air transfer plate from the frame.

Remove the two main screws using a 2.5 mm Allen key to separate the air transfer plate from the frame.

Step 4

  • Remove the screw using a 2.5 mm Allen key and remove the foregrip from the frame.

Remove the screw using a 2.5 mm Allen key and remove the foregrip from the frame.

Step 5

  • Use a 1.2 mm Allen key to remove the screw, and remove the cover to expose the OLED Board.

Use a 1.2 mm Allen key to remove the screw, and remove the cover to expose the OLED Board.

Step 6

  • Remove the last screw with a 2.5 mm Allen key to loosen the OLED Board.
  • Use a pick tool to carefully remove the battery and OLED Board together out of the foregrip.
  • Wear gloves in case battery is defective and leaking acid.

Remove the last screw with a 2.5 mm Allen key to loosen the OLED Board.

Use a pick tool to carefully remove the battery and OLED Board together out of the foregrip.

Wear gloves in case battery is defective and leaking acid.

Step 7

  • Disconnect the battery from the OLED board.

Disconnect the battery from the OLED board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Christopher Ramos

Member since: 10/05/2021

345 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       CSU Los Angeles, Team 11-2, Grodsky Fall 2021                        

                                                  Member of CSU Los Angeles, Team 11-2, Grodsky Fall 2021 



                    CSULA-GRODSKY-F21S11G2                     


                                            1 Member                     


                                            1 Guide authored