Difficulty

Moderate

Steps

8

Time Required

                          8 - 15 minutes

Sections

2

  • Back Cover
  • 4 steps
  • Buttons
  • 4 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAxess TA2513-10WT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.

Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.

1024

Step 2

  • Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons.
  • Slide the plastic opening tool gently along the sides.
  • If a small gap is not created between the screen and the back cover, pry gently upward at each of these latching points.

Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons.

Slide the plastic opening tool gently along the sides.

If a small gap is not created between the screen and the back cover, pry gently upward at each of these latching points.

Step 3

  • Place the spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.

Place the spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.

Step 4

  • Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.

Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.

Step 5

              Buttons
  • Orient the tablet’s back cover so that the inside faces up and the buttons are positioned at the top left corner.

Orient the tablet’s back cover so that the inside faces up and the buttons are positioned at the top left corner.

Step 6

  • Unlatch the clear rubber holder from the posts with the tweezers.

Unlatch the clear rubber holder from the posts with the tweezers.

Step 7

  • With tweezers, pull the rubber holder from the back cover completely.

With tweezers, pull the rubber holder from the back cover completely.

Step 8

  • Remove the individual buttons with tweezers.

Remove the individual buttons with tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 


                    Lori Scott

Member since: 03/24/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Baylor, Team 6-3, Shaver Spring 2015                        

                                                  Member of Baylor, Team 6-3, Shaver Spring 2015 



                    BU-SHAVER-S15S6G3                     


                                            3 Members                     


                                            10 Guides authored