Ayl Soundfit Battery Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

1

• Battery
• 5 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackAYL SoundFit

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the four hex screws on the top of the device using a 2.5 hex screwdriver.

Remove the four hex screws on the top of the device using a 2.5 hex screwdriver.

1024

Step 2

• Place a spudger between the black plastic cover and the green case.
• Pry the black cover away from the main casing and remove the cover.

Place a spudger between the black plastic cover and the green case.

Pry the black cover away from the main casing and remove the cover.

Step 3

• Place a spudger between the black housing, which contains the woofer, and the outer rubber casing.
• Pry the housing away from the body to reveal the motherboard, speaker, and battery.

Place a spudger between the black housing, which contains the woofer, and the outer rubber casing.

Pry the housing away from the body to reveal the motherboard, speaker, and battery.

Step 4

• Remove the two Phillips #00 screws securing the battery casing.
• Remove the battery case to reveal the battery.

Remove the two Phillips #00 screws securing the battery casing.

Remove the battery case to reveal the battery.

Step 5

• Desolder the positive and negative battery contacts from the motherboard.
• Remove the battery from the device.

Desolder the positive and negative battery contacts from the motherboard.

Remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Dustin Moore                     

Member since: 02/16/2016

108 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       IUPUI, Team 3-3, Harley Spring 2016                        

                                                  Member of IUPUI, Team 3-3, Harley Spring 2016 



                    IUPUI-HARLEY-S16S3G3                     


                                            4 Members                     


                                            5 Guides authored                     

jlongsa - Jun 19, 2017

Reply

Which battery is this, and what is the mAH?

Coba Farr - May 19, 2020

3.7V 1500mAh, 5.55Wh

Zaira Cortes - Aug 17, 2018

Reply

The charger works but it does not say chargeing