Ayl Soundfit Motherboard Replacement Repair Guide

Difficulty

Difficult

Steps

6

Time Required

                          15 - 45 minutes            

Sections

1

• Motherboard
• 6 steps

Flags

2

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackAYL SoundFit

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Motherboard               

• Unscrew the four hex screws on the top of the device using a 2.5mm hex screwdriver.

Unscrew the four hex screws on the top of the device using a 2.5mm hex screwdriver.

1024

Step 2

• Place a spudger between the black plastic cover and the green case.
• Pry the black cover away from the main casing and remove the cover.

Place a spudger between the black plastic cover and the green case.

Pry the black cover away from the main casing and remove the cover.

Step 3

• Place the spudger tool between the black housing, which contains the woofer, and the outer rubber casing.
• Pry the housing away from the body to reveal the motherboard, speaker, and battery.

Place the spudger tool between the black housing, which contains the woofer, and the outer rubber casing.

Pry the housing away from the body to reveal the motherboard, speaker, and battery.

Step 4

• Remove the two Phillips screws which are holding the battery casing on the housing using a PH00 Phillips screwdriver.
• Remove the battery case to reveal the battery.

Remove the two Phillips screws which are holding the battery casing on the housing using a PH00 Phillips screwdriver.

Remove the battery case to reveal the battery.

Step 5

• Using a soldering iron, heat up and remove the positive and negative battery contacts from the motherboard.

Using a soldering iron, heat up and remove the positive and negative battery contacts from the motherboard.

Step 6

• Remove the three Phillips screws which are holding the motherboard to the base using a PH00 Phillips screwdriver.
• The motherboard can now be wiggled free from the base.

Remove the three Phillips screws which are holding the motherboard to the base using a PH00 Phillips screwdriver.

The motherboard can now be wiggled free from the base.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    john                     

Member since: 03/10/2016

171 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       IUPUI, Team 3-3, Harley Spring 2016                        

                                                  Member of IUPUI, Team 3-3, Harley Spring 2016 



                    IUPUI-HARLEY-S16S3G3                     


                                            4 Members                     


                                            5 Guides authored                     

calvinsmith522 - Mar 23, 2017

Reply

Where do u get a new motherboard at?

David Whitman - Jan 3, 2018

Reply

Anybody know where to get a motherboard?

Where do I get a motherboard?