Difficulty

Easy

Steps

8

Time Required

                          10 minutes

Sections

2

  • Motherboard
  • 6 steps
  • Speaker
  • 2 steps

Flags

3

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackAYL SoundFit

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Unscrew the four hex screws on the top of the device using a 2.5mm hex screwdriver.

Unscrew the four hex screws on the top of the device using a 2.5mm hex screwdriver.

1024

Step 2

  • Place a spudger between the black plastic cover and the green case.
  • Pry the black cover away from the main casing and remove the cover.

Place a spudger between the black plastic cover and the green case.

Pry the black cover away from the main casing and remove the cover.

Step 3

  • Place the spudger tool between the black housing, which contains the woofer, and the outer rubber casing.
  • Pry the housing away from the body to reveal the motherboard, speaker, and battery.

Place the spudger tool between the black housing, which contains the woofer, and the outer rubber casing.

Pry the housing away from the body to reveal the motherboard, speaker, and battery.

Step 4

  • Remove the two Phillips screws which are holding the battery casing on the housing using a PH00 Phillips screwdriver.
  • Remove the battery case to reveal the battery.

Remove the two Phillips screws which are holding the battery casing on the housing using a PH00 Phillips screwdriver.

Remove the battery case to reveal the battery.

Step 5

  • Using a soldering iron, heat up and remove the positive and negative battery contacts from the motherboard.

Using a soldering iron, heat up and remove the positive and negative battery contacts from the motherboard.

Step 6

  • Remove the three Phillips screws which are holding the motherboard to the base using a PH00 Phillips screwdriver.
  • The motherboard can now be wiggled free from the base.

Remove the three Phillips screws which are holding the motherboard to the base using a PH00 Phillips screwdriver.

The motherboard can now be wiggled free from the base.

Step 7

              Speaker
  • Using a soldering iron, heat up and remove the positive and negative wire contacts from the motherboard.

Using a soldering iron, heat up and remove the positive and negative wire contacts from the motherboard.

Step 8

  • Remove four Phillips #1 screws to detach the speaker form the module.
  • Extract the speaker from the body of the AYL SoundFit.

Remove four Phillips #1 screws to detach the speaker form the module.

Extract the speaker from the body of the AYL SoundFit.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Sajal Kherde

Member since: 02/16/2016

107 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team 3-3, Harley Spring 2016                        

                                                  Member of IUPUI, Team 3-3, Harley Spring 2016 



                    IUPUI-HARLEY-S16S3G3                     


                                            4 Members                     


                                            5 Guides authored