Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- General Disassembly Prerequisite Guide
- 4 steps
Flags
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackAzpen A701
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
General Disassembly Prerequisite Guide
- Remove the two 2cm screws on the bottom using the PH0 Phillips head screw driver.
Remove the two 2cm screws on the bottom using the PH0 Phillips head screw driver.
1024
Step 2
- Pry open back piece with plastic spudger.
- Remove the back piece of the device.
- The back panel may be difficult to pry off, use gentle force.
Pry open back piece with plastic spudger.
Remove the back piece of the device.
The back panel may be difficult to pry off, use gentle force.
Step 3
- Disconnect speaker (which is attached by black and red wires) from back piece using plastic spudger.
Disconnect speaker (which is attached by black and red wires) from back piece using plastic spudger.
Step 4
- Gently pry the battery off of the device with the plastic spudger.
- There is a large amount of glue holding the battery to the device.
- Do not puncture the battery with the plastic spudger.
Gently pry the battery off of the device with the plastic spudger.
There is a large amount of glue holding the battery to the device.
Do not puncture the battery with the plastic spudger.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Michael
Member since: 03/11/2015
568 Reputation
4 Guides authored
Badges:
15
+12 more badges
Team
Colorado Springs, Team 2-1, Panko Spring 2015
Member of Colorado Springs, Team 2-1, Panko Spring 2015
UCCS-PANKO-S15S2G1
3 Members
12 Guides authored
