Difficulty

Moderate

Steps

6

Time Required

                          25 - 45 minutes            

Sections

2

  • Back Cover
  • 3 steps
  • Speaker
  • 3 steps

Flags

0

  • BackAzpen A720

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover               
  • Use a Phillips #00 screwdriver to remove the two 4mm screws found on the top edge of the tablet near the power button.

Use a Phillips #00 screwdriver to remove the two 4mm screws found on the top edge of the tablet near the power button.

1024

Step 2

  • Use the plastic opening tool to pry the white back from the silver frame. Start near the micro SD slot.
  • Slide the plastic opening tool around the perimeter of the casing until the back is disconnected.

Use the plastic opening tool to pry the white back from the silver frame. Start near the micro SD slot.

Slide the plastic opening tool around the perimeter of the casing until the back is disconnected.

Step 3

  • Remove the rear casing.

Remove the rear casing.

Step 4

              Speaker               
  • The speaker is a black oval located in the corner next to the battery.

The speaker is a black oval located in the corner next to the battery.

Step 5

  • Use a soldering iron to desolder the connections between the black and red speaker wires and the motherboard.
  • Remember which lead the black and red wires connect to on the motherboard.
  • Caution: The soldering iron gets very hot; be careful not to touch the tip and burn yourself. To learn to solder, click here.

Use a soldering iron to desolder the connections between the black and red speaker wires and the motherboard.

Remember which lead the black and red wires connect to on the motherboard.

Caution: The soldering iron gets very hot; be careful not to touch the tip and burn yourself. To learn to solder, click here.

Step 6

  • Remove the speaker from the tablet.

Remove the speaker from the tablet.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Anna                     

Member since: 03/17/2015

353 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Michigan Tech, Team 1-3, Lauer Spring 2015                        

                                                  Member of Michigan Tech, Team 1-3, Lauer Spring 2015 



                    MTU-LAUER-S15S1G3                     


                                            2 Members                     


                                            5 Guides authored