Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

2

  • Back Panel
  • 1 step
  • Battery
  • 4 steps

Flags

1

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackAzpen A740

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Use the plastic opening tool or black spudger tool to lift the back panel off the tablet.

Use the plastic opening tool or black spudger tool to lift the back panel off the tablet.

1024

Step 2

              Battery
  • Use the set of plastic opening tools to separate the inner backing from the electronics.
  • Unscrew the small size screws, with 3.75-3.85 mm approximately, holding the inner backing of Azpen A740 Tablet. Use the pentalobe screwdriver and plastic opening tool to pry open the inner backing.

Use the set of plastic opening tools to separate the inner backing from the electronics.

Unscrew the small size screws, with 3.75-3.85 mm approximately, holding the inner backing of Azpen A740 Tablet. Use the pentalobe screwdriver and plastic opening tool to pry open the inner backing.

Step 3

  • Disconnect the black, red, and grey wires leading to the battery from the motherboard using desoldering tools.
  • In order to desolder these connections follow the instructions on Ifixit’s How to Solder and Desolder Connections

Disconnect the black, red, and grey wires leading to the battery from the motherboard using desoldering tools.

In order to desolder these connections follow the instructions on Ifixit’s How to Solder and Desolder Connections

Step 4

  • Remove the black tape that is holding the battery in place.

Remove the black tape that is holding the battery in place.

Step 5

  • Remove the battery from the thermal paste that is under it by using the blue prying or black spuddger tool.
  • Put in the replacement battery and reassemble by doing in reverse order.
  • As you remove the battery it may be difficult to remove and it may bend. Do not worry this is common with the removal of tablet batteries.

Remove the battery from the thermal paste that is under it by using the blue prying or black spuddger tool.

Put in the replacement battery and reassemble by doing in reverse order.

As you remove the battery it may be difficult to remove and it may bend. Do not worry this is common with the removal of tablet batteries.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Maile Sinclair

Member since: 01/21/2015

228 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 4-5, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 4-5, Brown Winter 2015 



                    USFT-BROWN-W15S4G5                     


                                            3 Members                     


                                            12 Guides authored