Azpen A740 Camera Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 30 minutes

Sections

Back Panel
1 step
Camera
5 steps

Flags

BackAzpen A740
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Use the plastic opening tool or black spudger tool to lift the back panel off the tablet.

Use the plastic opening tool or black spudger tool to lift the back panel off the tablet.

1024

Step 2

              Camera

You should see the motherboard, the speaker, and the battery.
The camera is surrounded by the red square.

You should see the motherboard, the speaker, and the battery.

The camera is surrounded by the red square.

Step 3

The camera is located at the top of the device and is attached by one screw with 3.75mm which is inside of the red circle. And one clip which is inside of the orange rectangle.
First remove the screw from the plastic connecting the camera to the motherboard.
The ZIF connector attaching the camera to the motherboard.

The camera is located at the top of the device and is attached by one screw with 3.75mm which is inside of the red circle. And one clip which is inside of the orange rectangle.

First remove the screw from the plastic connecting the camera to the motherboard.

The ZIF connector attaching the camera to the motherboard.

Step 4

With the plastic now removed from the camera, the user is able to unclip the camera from the motherboard by pulling up the black clip and sliding out the camera.
Here you can see the rear camera is on the top and the front camera is on the top. As you can see, it is not possible to replace one camera and not the other.

With the plastic now removed from the camera, the user is able to unclip the camera from the motherboard by pulling up the black clip and sliding out the camera.

Here you can see the rear camera is on the top and the front camera is on the top. As you can see, it is not possible to replace one camera and not the other.

Step 5

This is what the camera looks like once completely removed from the tablet.
This is where the camera was previously, it is the place where the new camera must be placed.

This is what the camera looks like once completely removed from the tablet.

This is where the camera was previously, it is the place where the new camera must be placed.

Step 6

Now you are able to insert the new camera.
To reassemble your device, follow these instructions in reverse order.

Now you are able to insert the new camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Victoria  Poitier

Member since: 01/21/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team 4-5, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 4-5, Brown Winter 2015 



                    USFT-BROWN-W15S4G5                     


                                            3 Members                     


                                            12 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team