Difficulty
Moderate
Steps
7
Time Required
Suggest a time??
Sections
1
- B. Front Panel
- 7 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackBLV MGN Cube
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Printed parts needed:
1x Left Panel Face.stl
1x Left Small Panel.stl
1x Right Panel.stl
1x Right Small Panel.stl
1x Left Circle.stl
3x L Inner Fan.stl
3x L tip.stl
1x Right Circle.stl
1x Middle Circle.stl
1x Left Grill.stl
1x Left Lower Grill.stl
1x Right Grill.stl
1x Right Lower Grill.stl
1x Left Net.stl
1x Right Net.stl
1x Middle BLV Name Plate.stl
1x Letters
To make it easier print 3x L tips and 3x L Inner Fan instead of each individual L/M/R Tips and inner fans
What you need
Step 1
Front Panel Assembly
- Start by placing the NeoPixel rings into the circles. Make sure the pins are at the top center.
- Thread the Inner Fan part into the circle.
- Thread the tip into the Inner Fan.
Start by placing the NeoPixel rings into the circles. Make sure the pins are at the top center.
Thread the Inner Fan part into the circle.
Thread the tip into the Inner Fan.
1024
Step 2
Front Panel Assembly
- Screw the assembled Circle parts into the Front Face using 12x M3x8 countersunk screws
Screw the assembled Circle parts into the Front Face using 12x M3x8 countersunk screws
Step 3
Front Panel Assembly
- Glue the letters into the Middle Name Plate
- Slide in the Middle Name Plate, Left and Right Nets into the Assembled Front Panel
- Using 2x M3x8 button head screws secure the Middle Name Plate to the Assembled Front Panel.
Glue the letters into the Middle Name Plate
Slide in the Middle Name Plate, Left and Right Nets into the Assembled Front Panel
Using 2x M3x8 button head screws secure the Middle Name Plate to the Assembled Front Panel.
Step 4
Front Panel Assembly
- Slide in the Left and Right Grill into the Front Panel Assembly
Slide in the Left and Right Grill into the Front Panel Assembly
Step 5
Front Panel Mounting
- The Front Panel mounts to the Frame with 4x M3x8 socket head/button head screws with 4x M3 T-Nuts and 2x M5x10 button head screws with 2 M5 T-Nuts
- The Left and Right Lower Front Grill mount to the frame of the printer with 4x M3x8 button head screws with 4x M3 T-Nuts
The Front Panel mounts to the Frame with 4x M3x8 socket head/button head screws with 4x M3 T-Nuts and 2x M5x10 button head screws with 2 M5 T-Nuts
The Left and Right Lower Front Grill mount to the frame of the printer with 4x M3x8 button head screws with 4x M3 T-Nuts
Step 6
LCD
- Mount the backplate to the arm with 2x M3x8 button head screws.
- Mount the ball to the arm with 1x M3x8 socket head screw.
- I also used a drop of superglue.
- Insert the PanelDue into the backplate lining up the screw holes. Screw the backplate to the front plate with 4x M3x10 button head screws.
- Mount the full assembly to the front frame re-enforcement with 2x M5x10 button head screws and 2x M5 T-nuts
Mount the backplate to the arm with 2x M3x8 button head screws.
Mount the ball to the arm with 1x M3x8 socket head screw.
I also used a drop of superglue.
Insert the PanelDue into the backplate lining up the screw holes. Screw the backplate to the front plate with 4x M3x10 button head screws.
Mount the full assembly to the front frame re-enforcement with 2x M5x10 button head screws and 2x M5 T-nuts
Step 7
Results
- Looks pretty cool huh?
Looks pretty cool huh?
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 1 other contributor
David Husolo
Member since: 06/16/2021
7,245 Reputation
28 Guides authored
Badges:
14
+11 more badges
