Baby Einstein Take Along Tunes Battery Socket Replacement Repair Guide

Difficulty

Moderate

Steps

12

Time Required

                          10 minutes            

Sections

1

• Battery Socket
• 12 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackBaby Einstein Take Along Tunes

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery Socket               

• Set the device on it’s face with the back facing up.

Set the device on it’s face with the back facing up.

1024

Step 2

• Begin by removing all highlighted screws with a using a Phillips #1 Screwdriver.

Begin by removing all highlighted screws with a using a Phillips #1 Screwdriver.

Step 3

• Remove the battery plate with a plastic opening tool and set it aside.

Remove the battery plate with a plastic opening tool and set it aside.

Step 4

• Remove each battery with a plastic opening tool and set them aside.

Remove each battery with a plastic opening tool and set them aside.

Step 5

• Separate the device in two parts by using the plastic opening tool.

Separate the device in two parts by using the plastic opening tool.

Step 6

• Remove the top piece and place it aside, keeping the bottom half with the mechanics.

Remove the top piece and place it aside, keeping the bottom half with the mechanics.

Step 7

• Remove the highlighted screws using a Phillips #1 Screwdriver.

Remove the highlighted screws using a Phillips #1 Screwdriver.

Step 8

• Use the plastic opening tool and carefully set the LED panel to the side, exposing the wires underneath.

Use the plastic opening tool and carefully set the LED panel to the side, exposing the wires underneath.

Step 9

• With the precision tweezers, straighten the metal connectors to remove the terminals from the other side.

With the precision tweezers, straighten the metal connectors to remove the terminals from the other side.

Step 10

• Sever the red wire from the metal connector with the precision tweezers.

Sever the red wire from the metal connector with the precision tweezers.

Step 11

• Sever the black wire from the metal connector with the precision tweezers.

Sever the black wire from the metal connector with the precision tweezers.

Step 12

• Flip the device on its face and remove the battery terminals with a metal spudger.

Flip the device on its face and remove the battery terminals with a metal spudger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Shreya Sunny                     

Member since: 09/04/2015

607 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 2-2, Sullivan Fall 2015                        

                                                  Member of USF Tampa, Team 2-2, Sullivan Fall 2015 



                    USFT-SULLIVAN-F15S2G2                     


                                            4 Members                     


                                            7 Guides authored